Overview
This white 2012 Jaguar XFR has been modified in three stages: a Mina supercharger pulley and Mina exhaust, then a RICA ECU tune. Owner-reported Dynocom dynamometer runs in Calgary show the car rising from about 453–458 wheel horsepower at baseline to up to 567.9 hp after the final calibration. All figures are owner-reported.

Pulley, exhaust and calibration
Three baseline pulls ranged from 453.4 to 457.5 wheel horsepower. After the Mina pulley and exhaust were fitted, a second dyno session was run; the owner noted tyre slip on a subsequent pull and a stronger low-speed throttle response. A RICA ECU tune followed.
Final dyno results
The final graph shows three runs of 529.4, 559.7 and 567.9 hp. The highest run lists 492.2 lb-ft, while another run peaked at 494.4 lb-ft. Separate graphs compare the baseline, the pulley and exhaust, and the final calibration.

Car photograph and dyno graph posted by H.Jones on Jaguar Forums, reproduced with permission. Car photograph · Dyno graph