Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Modded Cars
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Ferrari

Front three-quarter view of Angelis’s black Ferrari 348 after its respray

Rear view of Angelis’s black Ferrari 348 after its respray

Photographs shared by Angelis in the PistonHeads build thread, reproduced with permission.

Chassis and interior

Angelis bought the 348 standard and developed it over several years. The car received 18-inch F355 magnesium wheels, 15 mm front and 25 mm rear spacers, 360 carbon-fibre seats and a 360 Challenge steering wheel. The owner documented an engine-out service with a friend, upgraded ignition leads and silicone hoses, and a complete respray from metallic black to solid black.

Le Mans engine project

In a later update, Angelis acquired a 348-based race engine associated with a Le Mans programme. The owner reported an engine-dyno output of 480 bhp and planned to adapt it for road use with a MoTeC M800. The thread records setbacks, so the engine purchase and intended installation should be read as a stage of the project.

Angelis’s original build and updates · Engine arrival and ECU update