Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Modded Cars
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Alfa Romeo

Changes from revision 1 to revision 2

Removed text is struck through; added text is highlighted.

Track preparation

This Alfa Romeo 147 GTA 3.2 V6 was bought used with 45,000 km and prepared for track days. The 3.2 V6 has an ECU remap and a carbon intake with silicone hoses. Other fitted parts are a reinforced clutch, adjustable Bilstein suspension, Pagid pads, braided brake lines and drilled and grooved discs.The front lip came from the 147 GTA Cup. Cadamuro supplied the carbon mirror covers and rear wing. The bonnet wears carbon-look film to protect it from stone chips.Cristian bought the 147 GTA used with 45,000 km and prepared it for track days. The 3.2 V6 received an ECU remap and a carbon intake with silicone hoses. The owner fitted a reinforced clutch, adjustable Bilstein suspension, Pagid pads, braided brake lines and drilled and grooved discs.The front lip came from the 147 GTA Cup. Cadamuro supplied the carbon mirror covers and rear wing. The bonnet wore carbon-look film to protect it from stone chips.

Varano and exhaust development

The car ran in its dotted livery at Varano in 2010, where a failed left-side joint ended the day. A later exhaust revision added Supersprint manifolds and two small silencers, because the four-outlet Ragazzon rear silencer alone left the car too loud for everyday driving.Cristian posted the car in its dotted livery at Varano in 2010, where a failed left-side joint ended the day. A later update describes fitting Supersprint manifolds and adding two small silencers because the four-outlet Ragazzon rear silencer alone left the car too loud for everyday driving.

Photographs shared by cristian.pet. on ClubAlfa.it and reproduced with permission.

SourcesClubAlfa.it thread: track build and engine-bay galleryClubAlfa.it thread: Varano photos and track-day reportClubAlfa.it thread: Supersprint manifolds and silencer updateOwner’s postsCristian’s track build and engine-bay galleryOwner’s Varano photos and track-day reportOwner’s Supersprint and silencer update

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 1: Cristian’s E.C.P. Team Alfa Romeo 147 GTA 3.2 V6

Track preparation

Cristian bought the 147 GTA used with 45,000 km and prepared it for track days. The 3.2 V6 received an ECU remap and a carbon intake with silicone hoses. The owner fitted a reinforced clutch, adjustable Bilstein suspension, Pagid pads, braided brake lines and drilled and grooved discs.

The front lip came from the 147 GTA Cup. Cadamuro supplied the carbon mirror covers and rear wing. The bonnet wore carbon-look film to protect it from stone chips.

Varano and exhaust development

Cristian posted the car in its dotted livery at Varano in 2010, where a failed left-side joint ended the day. A later update describes fitting Supersprint manifolds and adding two small silencers because the four-outlet Ragazzon rear silencer alone left the car too loud for everyday driving.

The 147 GTA with the bonnet raised over the V6

Cristian’s 147 GTA in its dotted Varano livery

Photographs shared by cristian.pet. on ClubAlfa.it and reproduced with permission.

Owner’s posts

Revision 2: Cristian’s E.C.P. Team Alfa Romeo 147 GTA 3.2 V6

Track preparation

This Alfa Romeo 147 GTA 3.2 V6 was bought used with 45,000 km and prepared for track days. The 3.2 V6 has an ECU remap and a carbon intake with silicone hoses. Other fitted parts are a reinforced clutch, adjustable Bilstein suspension, Pagid pads, braided brake lines and drilled and grooved discs.

The front lip came from the 147 GTA Cup. Cadamuro supplied the carbon mirror covers and rear wing. The bonnet wears carbon-look film to protect it from stone chips.

Varano and exhaust development

The car ran in its dotted livery at Varano in 2010, where a failed left-side joint ended the day. A later exhaust revision added Supersprint manifolds and two small silencers, because the four-outlet Ragazzon rear silencer alone left the car too loud for everyday driving.

The 147 GTA with the bonnet raised over the V6

Cristian’s 147 GTA in its dotted Varano livery

Photographs shared by cristian.pet. on ClubAlfa.it and reproduced with permission.

Sources