Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Modded Cars
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Ford

After four years with RS No. 1685, Luke stripped it for a weld-in cage. His first photographs show the dashboard and heater coming out and the sound deadening removed. Bob Dowen Rally Prep carried out the cage and shell work.

Dashboard removed during the strip-down of No. 1685

Dashboard removed during the strip-down of No. 1685. lukefrs on PassionFord, reproduced with permission. Original photo post.

Build updates

The updates show fabricated cage gussets, sill stands and stitch welding around the rear strut tops, engine bay and engine mounts. Luke also documented trial-fitting the seat and Tilton 600-series pedal box so the driving position could be set while the shell was bare.

Sill-stand tube in the shell during fabrication

Sill-stand tube in the shell during fabrication. lukefrs on PassionFord, reproduced with permission. Original photo post.

Original posts