This is Ford Focus RS Mk1 No. 1685, stripped to a bare shell for a weld-in cage after four years with its owner. Bob Dowen Rally Prep carried out the cage and shell work. The interior strip included removing the dashboard and heater and the sound deadening.

Dashboard removed during the strip-down of No. 1685. lukefrs on PassionFord, reproduced with permission. Original photo post.
Strip-down
The dashboard and heater were removed and the sound deadening stripped, leaving a bare shell.
Cage and shell work
The work includes fabricated cage gussets, sill stands and stitch welding around the rear strut tops, engine bay and engine mounts.

Sill-stand tube in the shell during fabrication. lukefrs on PassionFord, reproduced with permission. Original photo post.
Driving position
The seat and a Tilton 600-series pedal box were trial-fitted so the driving position could be set while the shell was bare.