Page organisation in this revision
- Page type
- Technical article
- Subject
- Flash chips
- Parent
- Section level
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- AMD, Merlo
Changes from revision 1 to revision 1
Removed text is struck through; added text is highlighted.
The 29F080 is an 8 Mbit, byte-wide flash designation that can be confused with the similarly sized but differently organised 29F800 family. AMD's Am29F080B datasheet specifies 1M × 8 bits (1 MiB), a single 5 V supply and 16 uniform 64 KiB erase sectors. It lists 40-pin TSOP and 44-pin SO package options. Check the exact order code, speed and temperature grade.
Reported controller use
A workshop forum post describes a Merlo telehandler ECU with a C167CR processor and external “29F080”. This is a single unverified report: it does not identify the ECU part number, chip manufacturer or suffix, and does not establish whether it is specifically an Am29F080B. Use it as a lead for identification rather than a universal fitment claim. Further board or manufacturer evidence would be needed to confirm the exact device.
Distinguishing 29F080 from 29F800
The Am29F080B uses an eight-bit data bus and uniform sectors. The Am29F800 boot-block family has the same nominal 1 MiB capacity but a different organisation and sector architecture. File size alone does not establish pinout, voltage, erase layout or replacement compatibility. Identify the full marking and consult its datasheet and programmer support before selecting a device.
Record the ECU and memory markings, read method and original file. A diagnostic read might cover a different range from the complete physical device.
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: 29F080 byte-wide flash in vehicle controllers
The 29F080 is an 8 Mbit, byte-wide flash designation that can be confused with the similarly sized but differently organised 29F800 family. AMD's Am29F080B datasheet specifies 1M × 8 bits (1 MiB), a single 5 V supply and 16 uniform 64 KiB erase sectors. It lists 40-pin TSOP and 44-pin SO package options. Check the exact order code, speed and temperature grade.
Reported controller use
A workshop forum post describes a Merlo telehandler ECU with a C167CR processor and external “29F080”. This is a single unverified report: it does not identify the ECU part number, chip manufacturer or suffix, and does not establish whether it is specifically an Am29F080B. Use it as a lead for identification rather than a universal fitment claim. Further board or manufacturer evidence would be needed to confirm the exact device.
Distinguishing 29F080 from 29F800
The Am29F080B uses an eight-bit data bus and uniform sectors. The Am29F800 boot-block family has the same nominal 1 MiB capacity but a different organisation and sector architecture. File size alone does not establish pinout, voltage, erase layout or replacement compatibility. Identify the full marking and consult its datasheet and programmer support before selecting a device.
Record the ECU and memory markings, read method and original file. A diagnostic read might cover a different range from the complete physical device.
Revision 1: 29F080 byte-wide flash in vehicle controllers
The 29F080 is an 8 Mbit, byte-wide flash designation that can be confused with the similarly sized but differently organised 29F800 family. AMD's Am29F080B datasheet specifies 1M × 8 bits (1 MiB), a single 5 V supply and 16 uniform 64 KiB erase sectors. It lists 40-pin TSOP and 44-pin SO package options. Check the exact order code, speed and temperature grade.
Reported controller use
A workshop forum post describes a Merlo telehandler ECU with a C167CR processor and external “29F080”. This is a single unverified report: it does not identify the ECU part number, chip manufacturer or suffix, and does not establish whether it is specifically an Am29F080B. Use it as a lead for identification rather than a universal fitment claim. Further board or manufacturer evidence would be needed to confirm the exact device.
Distinguishing 29F080 from 29F800
The Am29F080B uses an eight-bit data bus and uniform sectors. The Am29F800 boot-block family has the same nominal 1 MiB capacity but a different organisation and sector architecture. File size alone does not establish pinout, voltage, erase layout or replacement compatibility. Identify the full marking and consult its datasheet and programmer support before selecting a device.
Record the ECU and memory markings, read method and original file. A diagnostic read might cover a different range from the complete physical device.