The ZF 5HP family comprises five-speed hydraulic automatic transmissions with torque converters. Identify the exact assembly, suffix and original application before selecting a replacement, controller or parts: 5HP19, 5HP24 and 5HP30 are not interchangeable merely because they are all five-speed ZF automatics.
Gearbox types and model identification
BMW's ZF transmission identification and filler-plug reference identifies four BMW designations below. Its examples are not a complete list of model years or other manufacturers' versions. ZF's oil-kit service information lists the later type and manufacturer examples.
| ZF family | Example names or applications | Identification note |
|---|---|---|
| 5HP18 | BMW A5S 310Z | BMW explicitly distinguishes 5HP18 from 5HP19 and other automatic gearboxes in its identification reference. |
| 5HP19 | BMW A5S 325Z; BMW and Alpina examples in ZF service information | ZF's North American 5HP19 parts catalogue identifies the complete 1060 000 xxx specification numbers; match the plate and vehicle before ordering. |
| 5HP19 FL / FLA | ZF lists FL examples for Audi, Porsche, Škoda and Volkswagen; FLA examples for Audi and Volkswagen | Suffixes are listed separately in the ZF service document. The manufacturer listing is not proof every model or year uses the type. |
| 5HP24 | BMW A5S 440Z; ZF lists BMW, Alpina, Jaguar and Land Rover examples | Compare the specification number, housing, converter, electronic control and output arrangement. |
| 5HP24 A | Audi example in ZF service information | ZF lists 5HP24 A separately from the 5HP24; retain the suffix when identifying parts. |
| 5HP30 | BMW A5S 560Z; ZF lists Alpina, Aston Martin, Bentley, BMW and Rolls-Royce examples | ZF lists manufacturer applications separately; identify the exact vehicle and part number rather than assuming interchange. |
ZF's transmission identification charts show type, specification or catalogue number and serial number. Record those together with any vehicle-manufacturer number, donor VIN, year, engine and driveline. BMW's A5S 325Z is one ZF example; a five-speed BMW automatic is not necessarily a ZF 5HP. See BMW E46 automatic gearbox identification and diagnosis for the distinction between a ZF and a GM example.

Documented gear-ratio example
BMW's automatic transmission training material, 5HP19 for M52B25 gives these figures. Reverse is shown as a positive magnitude. They are not a guarantee for 5HP18, 5HP24, 5HP30 or every 5HP19 suffix.
| Gear | Ratio |
|---|---|
| 1 | 3.67 |
| 2 | 2.00 |
| 3 | 1.41 |
| 4 | 1.00 |
| 5 | 0.74 |
| Reverse | 4.10 |
The same BMW example quotes 300 Nm at 3,500 rpm. It is an application-specific figure, not a universal rating or a tuned reliability limit. The same gearbox family can have different converters, controls and installation details; establish limits using documentation for the actual specification.
Individual 5HP controller guides
- BMW GS 8.32 — selected 5HP18
- BMW GS 8.60.0 — selected 5HP19
- BMW GS 8.60.4 — selected 5HP19
- BMW GS 8.60.2 — selected 5HP24
- BMW GS 8.55 — selected 5HP24
- BMW GS 8.60.3 — selected 5HP30
- BMW GS 9.22 — selected 5HP30
- Spitronics Callisto — 5HP19 standalone
Factory control and workshop diagnosis
ZF's 1998 5HP19 functional description describes the hydraulic control unit on that transmission and a separate vehicle-mounted electronic transmission control unit, EGS. That example uses inputs including speed, temperature, selector and engine information, and operates solenoid valves and pressure regulators. It describes both CAN and discrete interfaces for different configurations. Do not assume the integrated 6HP/8HP mechatronic arrangement, a particular EGS model, wiring or CAN scheme applies to every 5HP.
BMW identifies the illustrated 5HP19 application as using AGS 8.60.4 adaptive control in its training reference. Record the actual TCU label, software number, gearbox spec and donor rather than treating the gearbox name as a universal controller number. Read fault codes and preserve the vehicle's configuration and adaptations before changes; inspect power, ground, selector indication, wiring, cooling and fluid condition as appropriate to the actual fault.
For an Audi/VW 01V / 5HP19 example, Ross-Tech documents diagnostic coding differences by equipment and drivetrain; this is not a universal 5HP coding table and does not establish that every diagnostic tool can reflash the original TCU.
Replacement control and recalibration
Spitronics' 5HP19 TCU kit describes its Callisto standalone controller as an alternative for the 5HP19 and supplies a model-specific wiring guide. This is a separate controller arrangement, not proof of compatibility with all 5HP variants or direct flashing of the factory EGS. Check selector, solenoids, sensors, power and engine torque coordination with the supplier against the exact transmission and controller revision.
Factory diagnostics, coding and resetting adaptations are different operations from reading, editing and rewriting a TCU calibration. Confirm each tool's documented protocol for the actual factory controller and retain a supported recovery path; do not assume an 8HP flashing tool supports 5HP. No universal 5HP factory-module recalibration tool or pinout is asserted here.
Fluid and servicing
ZF's oil-change kit listings distinguish 5HP19, 5HP19FL/FLA, 5HP24, 5HP24A and 5HP30. Oil selection must follow the particular type and plate: the ZF 5-speed fluid reference distinguishes, for example, green- and black-plate 5HP18 and a black-plate BMW 5HP30. Do not substitute fluid solely because another 5HP uses it.
BMW's fill and level service bulletin gives conditions for its specified transmissions, including a level vehicle and a temperature range. Use the current vehicle- and gearbox-specific service procedure and oil specification; oil temperature, running state and filling steps matter.
Owner discussion
An E39 discussion describes a member's gearbox-software change and questions about which EGS and transmission variants were involved. This is an unverified owner report, not an approved cross-flash procedure or evidence that another car or controller is compatible. Check controller hardware, software and exact application before programming.
Related: ZF gearboxes and transmission control; ZF 6HP and 8HP transmission tuning and swap diagnosis. Sources reviewed 17 November 2026.