Scope. Gear-dependent torque requests and boost limits can be useful tuning tools, but their implementation depends on the engine, transmission, ECU software and any installed patch. OEM names below are from the community SC8S5031_C_OEM Simos 18.1 reference; match the exact software, transmission type, variant selectors, gear coding, axes and units before using them. These names are not universal limits or values to copy.
Torque by gear and boost by gear
Maximum torque, driver demand, air charge and boost are related but separate parts of Simos 18's control. A gear-dependent torque ceiling can constrain the output requested in a gear; a gear-dependent pressure ceiling constrains a pressure request. Neither guarantees a particular measured torque, tyre grip or boost pressure. Other engine, transmission, traction and protection limits can be more restrictive. EcuTek EA888 engine-tuning overview.
Lower gearing multiplies torque at the driven wheels, so a torque curve that feels manageable in one gear may produce wheelspin or a different load transient in another. Tyres, road conditions, temperature and traction-control state matter. A calibrated ceiling is not a replacement for working stability and traction controls or a reason to misreport torque to the gearbox.
Example OEM gear-dependent torque maps
The SC8S5031 TQSP combustion-control limitation reference lists:
ip_tq_pow_max_at[4][2]: maximum allowed torque at the clutch for the documented automatic-transmission path, in Nm, against engine speednandgear. The field name is a multi-dimensional family; confirm the applicable power-class and transmission-type selection and gear interpretation.ip_tq_pow_max_mt[4][1]: maximum allowed clutch torque for the documented manual path, likewise in Nm against engine speed and gear. The copied functional-description text beside the extracted map is inconsistent; confirm the active map and axes using the matching definition and logs. A separate four-wheel-drive variant is mentioned by the source.tq_lim_gb_prot_max: runtime maximum torque limitation for gearbox protection, not an editable clutch-torque map. Its source and activation depend on the powertrain configuration. CUSF runtime signal reference.
The presence of an AT and an MT family does not establish that only one table matters on every configuration. The community Eurodyne table description describes RPM/gear maximum clutch torque tables for its software. A tuning-tool label is a view of a particular implementation; confirm selection and scaling on the file being edited.
Patch-specific boost ceilings
The Simos.app Main Patch guide documents a per-slot Boost limit by rpm and gear in absolute hPa. In that implementation the ECU uses the lower of the OEM request and patch ceiling: the added map is a ceiling and cannot itself raise the OEM setpoint. The guide assigns row 0 to neutral and row 1 to first gear, uses row 7 for higher gears, and holds the last gear during a shift. These are that patch's documented conventions, not a generic Simos 18 gear map. Verify the installed patch version, slot and units.
In the same patch, Torque Limit AT, Torque Limit MT and Torque Limit ECO are separate per-slot controls; the guide says its AT and MT tables are used for every gearbox variant, with a separate Eco table. This product-specific rule should not be generalized to other tools or unpatched software. Compare with the active mode and actual target rather than assuming the label identifies the only active limiter.
Practical comparison
- Record ECU and transmission identifiers, installed patches, selected map and drive mode, fuel, gear, tyre and road conditions. Establish healthy hardware and gearbox behavior first.
- With suitable channels, compare accelerator position, gear and shift state, driver torque request, selected torque limit, modelled torque, traction intervention, manifold and upstream-throttle pressure and their targets, and wastegate request/feedback. COBB's MQB monitor list is a product-specific example. Align timestamps, units and absolute versus gauge pressure.
- Compare equivalent engine-speed and load regions in each gear under controlled conditions. A slow pressure rise may be actuator, leakage or request related; a lower pressure target can be an active ceiling rather than a hardware fault. A transient shift intervention is not necessarily a steady-state gear limit.
- Retain validated torque reporting, gearbox coordination and protection functions. Confirm actual hardware and component limits rather than assuming an ECU calibration value proves safe grip, clutch capacity or turbocharger speed.
For ratio-based gear recognition and clutch-input checks, see Simos 18 manual gear detection and clutch switch diagnosis.
Related: accelerator pedal and driver request · torque model · DSG torque coordination · traction control · switchable maps · boost control.
Worked example: manual-shift torque reduction
A Stage 3 Golf VII GTI with a manual gearbox and Simos 18.1 was reported (NefMoto report) to show a prolonged torque limitation after aggressive 2–3 and 3–4 shifts, with a smoother recovery to the desired torque after several seconds. Reviewing ip_maf_stk_sp_vvl_cam_h and ip_tqi_ref_n_m_air_vvl_cam_h was suggested. The report does not establish which limit was active or give a confirmed fix. These are respectively examples of torque-to-air request and air-to-reference-torque map families, with selection and axes described in the torque model guide; the suggestion is not proof that changing them will cure this symptom.
Compare a repeatable event's gear and clutch signals, driver and gearbox requests, torque limitation source, air-charge request and estimate, and target and actual boost with appropriate sampling and matched calibration. A shift transient, held gear, traction event, active protection and an incorrectly represented air/torque relationship can lead to different diagnostic paths; preserve the logs and establish the cause before editing maps.
Sources
- Community SC8S5031 TQSP torque limitations and CUSF runtime values — image-specific definitions.
- Simos.app Main Patch guide — product-specific boost-by-gear and slot behavior.
- Simos Wiki: Eurodyne tables — community tool description.
- EcuTek EA888 engine tuning and COBB MQB monitor list — product-specific control and logging terminology.
- NefMoto manual-shift torque-reduction thread — individual report, no confirmed cause.