RT LIVE Motorsport V2 combines onboard data acquisition with cellular live telemetry; service, SIM and coverage affect live reporting.

Specifications and capabilities
The V2 documentation lists 10 Hz GPS, an optional 20 Hz upgrade, 64 MB buffer, CAN, serial and sensor connections. Check firmware, installed options and cellular network compatibility. Manufacturer specifications and documentation.
Data analysis software
The manufacturer says uploaded RT LIVE V2 recordings are stored as Race Technology .RUN files, compatible with its Analysis software; live monitoring requires the configured cloud connection and service. Manufacturer documentation.

Download Race Technology software for Windows. Check the current version and any licence or hardware requirements; some advanced functions require a unit-linked licence. See the Race Technology software overview for features and licensing.
Pinouts and cabling
V2 front nine-way connector:
| Pin | Function |
|---|---|
| 1 | CAN low |
| 2 | RS232 1 RX |
| 3 | RS232 1 TX |
| 4 | RS232 2 TX |
| 5 | Ground |
| 6 | RS232 2 RX |
| 7 | Power output |
| 8 | CAN high |
| 9 | Not connected |
Motorsport V2 rear 12-way connectors A and B:
| Pin | Connector A | Connector B |
|---|---|---|
| 1 | A1 | A5 / O1 |
| 2 | A3 | A7 / O3 |
| 3 | RS232 RX | Status |
| 4 | RPM high level | CAN high |
| 5 | 12 V power in | 12 V power in |
| 6 | 5 V sensor supply | Trigger |
| 7 | Lap trigger | iButton |
| 8 | Ground | Ground |
| 9 | RPM high-level ground | CAN low |
| 10 | RS232 TX | RPM low level |
| 11 | A4 | A8 / O4 |
| 12 | A2 | A6 / O2 |
Manufacturer connection reference.
Check the connector number, version and options on the actual unit against the manufacturer's documentation before wiring. Disconnect power before changing connections.
Wiring overview
Return to the Race Technology manufacturer page.