Dynomag Hub is Magicmotorsport's hub-coupled chassis dynamometer. It uses two hub units for a 2WD vehicle or four for a suitable 4WD vehicle, plus a control station. It is a physical workshop load and measurement system; Magicmotorsport's DynoRoad is a separate portable road-performance instrument. See hub dynamometers and the manufacturers directory.

Product background
Magicmotorsport says Dynomag Hub was designed, engineered, tested and assembled in Italy. The Equip Auto 2023 product guide records a September 2023 launch. Magicmotorsport makes other tuning products as described in its company tools page; their software and vehicle support are separate from this dyno.
How it applies load
After the driven wheels are removed, the hub units couple to the car through appropriate adapters. The manufacturer's Dynomag Hub brochure identifies an eddy-current brake in each unit and an articulated axle. A magnetic brake creates resisting torque while its cooling system removes heat; it is not a hydraulic pump or water-brake absorber.
Hub measurement avoids tyre slip against rollers but remains downstream of the vehicle transmission and final drive. Torque, speed and reported power must be interpreted at the stated measurement point; any estimated crankshaft output is not a direct engine-dyno measurement.
Control station and configuration
The manufacturer's product page describes a control totem with proprietary software and connections for 2WD or 4WD units. An appropriately equipped system can be configured for the vehicle's driven axles. Confirm the exact set, software features, adapters, supply, cooling, safety procedures and vehicle compatibility with the supplier; a 4WD control station alone is not four absorber units.
Model availability and specifications vary by market and configuration. The details above were checked 17 November 2026 against the linked manufacturer and exhibition sources.