Tuning Wiki

Hyundai and Kia use eight-speed wet dual-clutch transmissions in specific vehicle applications. The documented Hyundai Santa Fe 8DCT uses wet clutch technology and electric oil pumps. It is distinct from Hyundai's seven-speed dry DCT and iMT. Identify the VIN, market, model year, powertrain, transmission and controller before applying any recall or diagnostic procedure; not every vehicle sold under a model name has the same gearbox.

Oil-pump and loss-of-drive recalls

In US recall 22V746 / Hyundai 236, Hyundai described a high-pressure electric oil-pump fault that could cause warning messages and, with the affected fail-safe logic, a subsequent loss of drive. The recall covers specified 2021–22 Santa Fe, Sonata and Veloster N and specified 2022 Santa Cruz, Elantra N and Kona N vehicles. The documented remedy includes transmission-control software updating and inspection or repair as directed by Hyundai. This is a defined vehicle population; a warning or a matching model year does not establish recall applicability. Check the individual VIN, current instructions and completion status with Hyundai or the appropriate regulator.

Kia's separate US recall 22V760 / SC250 covers specified 2021–22 Sorento and 2021–23 K5 vehicles with the 2.5-litre turbo engine and 8DCT. Kia identified an electric oil-pump circuit-board manufacturing issue that could lead to warnings and loss of drive; its remedy involves inspection, transmission replacement if needed, and a control-software update. Verify the Kia VIN and repair status separately; the Hyundai and Kia recall populations and procedures are not interchangeable.

Separate 2024 Santa Fe parking recall

US recall 24V529 / Hyundai 263 concerns certain 2024 Santa Fe vehicles and a different control-software issue that can damage transmission or parking components and permit rollaway. Hyundai's owner notice describes two remedy steps: a software update followed by dealer inspection, with transmission replacement if needed. A completed over-the-air update alone does not complete the inspection step described by that notice. Hyundai advises affected owners to use the electronic parking brake until the inspection; check the actual VIN, current manufacturer guidance and status. Do not infer that a vehicle is affected from its model alone.

Pressure-pump fault codes

Hyundai TSB 26-AT-001H, March 2026, addresses specific 2.5T Santa Cruz, Santa Fe and Sonata N Line applications and lists P1C2D03 for the high-pressure electric oil-pump motor position sensor, P193B79 for pump performance and P086800 for low transmission-fluid pressure. It describes transmission replacement in its defined cases and asks the technician to verify completion of any applicable recall 236 or campaign T8N before replacement. A base code, warning or pressure complaint alone does not establish the repair for every 8DCT: match the full code, vehicle, production and software history and follow the current vehicle-specific diagnostic process.

Workshop evidence and repair

  1. Record the precise symptoms, warning, gear, operating conditions and complete diagnostic data before clearing codes or programming; identify any outstanding or previously completed campaign by VIN.
  2. Follow the manufacturer's fault-directed checks for power, controller communication, electric oil-pump and transmission pressure data, fluid circuits and leaks. A reported low-pressure value is not by itself proof of a particular failed component.
  3. Use the exact model's current repair, fluid, filling, programming and verification instructions. Software updates do not physically repair damaged hardware, and parts or procedures should not be transferred between manufacturers or gearbox generations.

Related: Hyundai seven-speed dry DCT, automated clutch control and the electronic gearbox index.