Tuning Wiki
Browse DENSO

Injector catalogue › Diesel injector catalogue | Diesel testing | Test equipment

Application examples are identification leads for selected variants; a model or engine name alone does not establish fitment. Match the complete injector and vehicle OE numbers, suffix, engine code, year, emissions level, calibration and current supersessions. Entries grouped by a source do not establish that every number fits every vehicle in the group or that the numbers are interchangeable.

Diesel delivery is meaningful only with the matching injector, bench, fluid, temperature, rail pressure, drive waveform, pulse and counting conditions. Where a complete acceptance plan is not published here, use the current authorised plan for the actual injector and bench.

Disassembled DENSO G2P diesel injector components
DENSO G2P piezo common-rail injector components from a Toyota Corolla Verso 2.2 D-CAT, from a research example. The paper does not identify a complete part number; the picture does not identify any numbered entry below. Tomasz Stoeck, Combustion Engines, 2023, figure 5a, CC BY 4.0; extracted from the original figure.

DENSO aftermarket catalogue numbers

DENSO range update 1 and DENSO range update 2 give these catalogue numbers, DENSO aftermarket numbers, OE references and application groups. Each linked catalogue part page is a source of product illustrations when provided by DENSO. The AM number is an aftermarket identifier; do not infer a separate 095000 production number without a verified cross-reference.

DENSO catalogue numberDENSO aftermarket numberOE referenceApplication group; source
DCRI4001802601008020AMVolvo 31405404 / 36010045Volvo D4204 Gen 1; selected S60/V60/S90/V90/XC60/XC70/XC90, 2013–22 (DENSO)
DCRI4006702601008050AMVolvo 31452113 / 36010392Volvo D4204 Gen 2; selected V40/S60/V60/S90/V90/XC40/XC60/XC90, 2014–22 (DENSO)
DCRI4006802601008060AMVolvo 31452114 / 36010393Volvo D4204 Gen 2; selected S90/V90/XC60/XC90, 2016–22 (DENSO)
DCRI4006902601008080AMVolvo 31452115 / 36011572Volvo D4204 Gen 2; selected V40/V60/S90/V90/XC40, 2015–22 (DENSO)
DCRI4000602601008030AMVolvo 31336769 / 36010089Volvo D4204 Gen 1; selected S60/V60/S90/V90/XC60/XC90, 2015–22 (DENSO)
DCRI4001402601008000AMHyundai 33800-4A900Hyundai D4CB; selected H-1 / Starex / H100 / H350 / Porter, 2013 onward (DENSO)
DCRI4002802601008040AMVolvo 31336878 / 36010090Volvo D4204 Gen 1; selected V40/S60/V60/V70/S90/V90, 2015–21 (DENSO)
DCRI4002902601008010AMHyundai 33800-4A950Hyundai D4CB; selected H-1 / Starex / H100 / H350 / Porter, 2013 onward (DENSO)
DCRI4007812601008090AMMAN 99.10100-6197 / 51.10100-6197MAN bus / truck D1556 family, 2017 onward (DENSO)
DCRI4009502601008110AMOpel / Vauxhall 55490361 / 95529874 / 95524226Astra K / Insignia B, F15 DV* / D15 DV*, 2019 onward (DENSO)
DCRI4010202601008100AMVolvo 23088481 / Renault Trucks 7423088481Volvo / Renault trucks, bus, industrial / Penta TAD570/TAD870, 2018 onward (DENSO)
DCRI4014302601008070AMVolvo 31432836 / 36003287Volvo D4204 Gen 3; selected S90/V90/XC60/XC90, 2019 onward (DENSO)

Older production-number examples

Exact references below combine the linked individual source with family information from Hartridge TIB195/11. An “x” family in that bulletin is not by itself evidence that every suffix is interchangeable.

DENSO numberOE / service referenceApplication leadSource / photo
095000-0570 (0950000570)DCRI100570; Toyota 23670-27030 / 23670-27010Toyota Avensis T22 2.0 D-4D 1CD-FTV, 81 kW, 10/1999–02/2003; other selected Toyota applicationsapplication sheet; vehicle detail and supplier photo
095000-0510 (0950000510)Nissan 16600-8H800Nissan X-Trail T30 2.2 dCi / Di YD22ETI, 114 hp, 2001–03, selected FWD and 4×4application, OE and product photo; exchange list
095000-0940 (0950000940)Toyota 23670-30030; 23670-39035 listed in the 095000-094x familyToyota Hiace 2.5 D-4D 2KD-FTV, 2001–06; Hilux 2.5 2KD-FTV 4WD, 2005–06; Dyna 2.5 groupapplication, OE and product photo; Hartridge family bulletin
095000-5890 (0950005890)Toyota 23670-39135Toyota Land Cruiser Prado 1KD common-rail system, documented in the September 2004 DENSO bulletinDENSO service bulletin 00400086E; FIRAD catalogue
095000-5930 (0950005930)Toyota 23670-09060 / 23670-0L010; Merlin lists 095000-7760 as replacementToyota Hilux 2.5 2KD-FTV from 06/2004; Hiace 2.5 2KD-FTV from 07/2005, selected variantsMerlin application / product photo; Hartridge family bulletin
095000-5080 (0950005080)DCRI105080; Opel / Vauxhall 97313861; Isuzu 8-97313861-0 listedOpel / Vauxhall Corsa C 1.7 CDTI 100–101 hp; Meriva A 1.7 CDTI 100 hp, 2003–10; Astra / Combo groupsupplier OE, application and photographs; Hartridge family bulletin
095000-6520 (0950006520)Toyota / Hino 23670-E0090 listed by supplierHino / Toyota Dyna with N04C enginesupplier part and photograph
095000-8290 (0950008290)Toyota 23670-0L020 / 23670-0L050 listed by supplierToyota Hilux 3.0 1KD-FTV Euro 3, selected variants; broader Hilux / Land Cruiser / Prado familysupplier part and photographs; FIRAD catalogue

Test information for identified families

For the Toyota 095000-057x / -094x / -589x / -593x grouping, Hartridge's 2011 AVM2-PC / CRi-PC fixture bulletin lists HK907 (NTA5101) nosepiece, HK910 (NTA5302) backleak adaptor, clamp components HK997 + HK956 + HK932, pipe AHP5065 and cable HK905. Verify the correct variant and current equipment instructions. For 095000-508x, the listed adapters are HK907 and HK1006; the clamp depends on whether AVM2-PC or CRi-PC is used. Hartridge issue 18, page 7.

DENSO 095000-6520: published research observations

An Ecuadorian university test report, tables 5–9 describes these bench settings and readings for 095000-6520. Delivery is reproduced in the source’s “mm³/H” notation; H is not clearly defined, so the values cannot be reliably converted to another unit. Fluid temperature and the full drive waveform are not specified for every point. These are research observations, not a verified current DENSO pass/fail plan.

Test pointPressurePulseBench speed; durationTarget as printedObserved as printed
Full load (VL)140 MPa (1,400 bar)1,500 µs800 rpm; 40 s120.5 ± 10.4 mm³/H125.3 mm³/H
Emissions (EM)80 MPa (800 bar)700 µs500 rpm; 40 s28.2 ± 8.6 mm³/H27.8 mm³/H
Idle (LL)30 MPa (300 bar)800 µs300 rpm; 40 s8.5 ± 5.2 mm³/H7.9 mm³/H
Pre-injection (VE)60 MPa (600 bar)500 µs800 rpm; 40 s7.0 ± 4.8 mm³/H6.4 mm³/H
Post-injection (VE2)60 MPa (600 bar)350 µs600 rpm; 40 s2.4 ± 2.0 mm³/H2.1 mm³/H

Use the current exact-part test plan and equipment instructions to make a service decision. The thesis also shows oscilloscope examples, but its calculated electrical durations differ from some table pulse settings; they should not be treated as a complete prescribed drive waveform.

No complete current manufacturer acceptance values are available from the listed sources for most entries. Use the correct equipment and report pressure, waveform, temperature, injection quantity and return independently.