Many modification plans reach the catalytic converter: a performance exhaust, a downpipe, a larger turbo. This page explains what the converter does, how much it limits flow, what damages it and the legal position. For the rest of the exhaust see aftermarket exhaust systems and exhaust system tuning.
What it does
A three-way catalytic converter does three jobs at once: it reduces nitrogen oxides to nitrogen, and oxidises carbon monoxide and hydrocarbons to carbon dioxide and water. The reactions work best when the engine runs close to the stoichiometric air-fuel ratio, so the engine management holds the mixture oscillating around it using oxygen sensors. Efficiency falls quickly outside that band (Wikipedia: Catalytic converter). See air-fuel ratio and wideband lambda sensors for how the sensors work.
A converter also needs to be hot. It requires about 400 °C to work effectively, and most emissions occur in the first few minutes of running before it warms up. That is why some designs are electrically heated.
Does it restrict the exhaust?
Faulty converters, and early undamaged designs, can restrict exhaust flow, which hurts performance and economy. Modern converters do not significantly restrict flow. One 2006 test on a 1999 Honda Civic found that removing the stock converter gained only 3 per cent maximum horsepower, and that a new metallic-core converter cost about 1 per cent. That is one car's result, so do not treat it as a general figure. The practical points are that a blocked or damaged converter is worth finding, and that a high-flow replacement can lower restriction without leaving the emissions system out.
What damages a converter
- Lead and other poisons. Lead, sulfur, manganese, silicon, phosphorus and zinc coat the catalyst. Lead deposits usually cannot be burned off, so leaded or contaminated fuel and additives are a risk.
- Misfires and unburnt fuel. These raise converter temperature and risk melting the substrate, deactivating the catalyst and restricting the exhaust. Causes include ignition faults, fuel system faults, failed exhaust manifolds and oil or coolant leaks.
That is why a power upgrade needs a sound calibration: a rich or misfiring engine can destroy a converter, and a restricted converter can in turn reduce power. See ignition tuning and spark plugs.
Oxygen sensors and diagnostics
A sensor before the converter drives closed-loop mixture control. On cars with on-board diagnostics, a sensor after the converter is compared with it. If the two show the same output, or the rear sensor is switching, the computer flags the converter as not working or removed. Sensor simulators are not legal for road use. A modified exhaust that moves the sensors, or a change that alters their readings, can set a fault code and put the engine into a default mode.
The law
In many jurisdictions, removing or disabling a catalytic converter is illegal except for direct replacement. In the United States, the Clean Air Act prohibits removal by repair shops and the sale or fitting of parts that defeat emission controls. Rules in the United Kingdom and elsewhere differ and change, so check current law and the MOT or roadworthiness requirements in your country with a qualified local provider. A converter-delete part may be sold for competition use only, and is not suitable for a road vehicle. Converters are also a frequent theft target because of their precious-metal content.
Choosing and checking
- Establish whether the existing converter is healthy before blaming it: look for a restriction, rattling, overheating and fault codes, and check the mixture and misfire history.
- If a replacement is needed, use one approved for the vehicle and the intended use, with the right flow rating for the engine.
- Keep the sensors in the positions and with the wiring the engine management expects, and recheck for leaks upstream of them, which let in air and mislead the readings.
- After any exhaust change, log the mixture and the exhaust temperature, and check the car still passes the required test.
Sources
- Catalytic converter. Wikipedia. Three-way function, operating temperature, restriction, damage causes, sensors and legal notes. Accessed 2026-11-19.