Bosch DDU 11 combines a 6.5-inch programmable display with 4 GB basic logging of 100 channels at 20 Hz. Full logging, a second partition, USB recording and external GPS are options. Additional inputs depend on IO_EXTENS. Bosch DDU 11 specification.

Data analysis software

Bosch lists the DDU 11 among WinDarab-supported devices. Use WinDarab V7 on a PC to examine downloaded logged channels, compare measurements and review traces. The available channels and transfer method depend on the DDU 11's configuration and enabled options. Bosch supported devices.
WinDarab V7 download, documentation and edition information. RaceCon is a separate configuration tool for compatible devices. See the Bosch Motorsport software overview.
Connector and pinout
Mating connector TE 3-1437290-7, terminals 3-1447221-4. Pins 14/21 can be CAN 2 or RS232 and require IO_EXTENS. USB pins require DATA_USB. Identify cavities by the manufacturer's diagram and the actual connector. Bosch product pin configuration.

| Pin | Signal (Bosch designation) | Availability |
|---|---|---|
| 1 | KL30_KL15/UBAT | Included |
| 2 | SENSGND | Included |
| 3 | SENSPWR (5 V or UBAT switched) | Included |
| 4 | SIG2_IN | IO_EXTENS |
| 5 | SIG4_IN | IO_EXTENS |
| 6 | USB_GND | DATA_USB |
| 7 | USB_PWR | DATA_USB |
| 8 | KL31/GND | Included |
| 9 | SIG5_IN_LAPTRG | IO_EXTENS |
| 10 | SIG1_IN | IO_EXTENS |
| 11 | SIG3_IN | IO_EXTENS |
| 12 | USB_DN | DATA_USB |
| 13 | USB_DP | DATA_USB |
| 14 | CAN_2_H_RS232_TX | IO_EXTENS |
| 15 | CAN_1_H | Included |
| 16 | ETH_CHANNEL0_TXN | Included |
| 17 | ETH_CHANNEL0_TXP | Included |
| 18 | ETH_CHANNEL0_RXN | Included |
| 19 | ETH_CHANNEL0_RXP | Included |
| 20 | TIMESTMP_INOUT | Included |
| 21 | CAN_2_L_RS232_RX | IO_EXTENS |
| 22 | CAN_1_L | Included |
| 23 | ETH_CHANNEL1_TXN | Included |
| 24 | ETH_CHANNEL1_TXP | Included |
| 25 | ETH_CHANNEL1_RXN | Included |
| 26 | ETH_CHANNEL1_RXP | Included |
Installation and related information
Confirm the precise model, hardware revision, enabled options and manufacturer's wiring diagram before connecting. Use correct power protection, sensor limits and the chosen ECU protocol; a compatible connector does not guarantee compatible data. Configure in the appropriate Bosch software and verify a short recording or connection. See the Bosch Motorsport manufacturer overview.