GS19.11 M-shift is a Bosch/ZF 6HP28 mechatronic controller documented by a Jaguar/Land Rover specialist for selected Land Rover applications. Its hardware identity and software should be checked separately from the gearbox name.

Identification and compatibility
Old Jaguar's specialist part-number list identifies a 6HP28 GS19.11 M-shift example as Bosch 0260550041 / ZF 6058007117, with Land Rover L319, L320 and L322 examples. It distinguishes the Jaguar E-shift example with Bosch 0260550043 / ZF 6058007115. These are reported examples, not automatic cross-fitment permission; verify VIN, TCM and gearbox IDs, software and mechanical selector.
The specialist describes 0260550041 as an alternative in certain cases to a Continental 5WK75020AA module. This is not proof of plug-and-play interchange: its matching notes describe programming requirements. See the separate Continental 5WK75020AA guide and Jaguar GS19.11 E-shift guide.
Pinout status
A connector pinout directly tying this particular hardware number to a documented Land Rover wiring diagram was not verified in the sources reviewed. No pin functions are asserted here. A 16-way connector can have different assignments between applications and selector systems. Obtain the exact VIN-specific wiring diagram, connector identification and face orientation before connecting any power or programming equipment.
Programming and calibration
PCMflash lists a Jaguar/Land Rover module 81 for selected ZF 6HP26/28 TCMs and read, write and checksum, according to its manufacturer manual. The manual does not associate that protocol with every part number: confirm exact controller, vehicle, operation, licence and current requirements. Calibration editing is separate from reading and writing a file.
Magicmotorsport FLEX lists 6HP bench duplication in its duplicable unit list; that is not proof of a supported recalibration procedure for this precise module. Confirm supported recovery and preserve the original data before changing an actual vehicle.
See ZF 6HP gearbox types and controllers. Sources reviewed 17 November 2026.
Community installation and service notes
In a 2023 FullFatRR 6HP28 discussion, contributor RRPhil describes an M-shift valve body and the need to distinguish its intermediate plate from the E-shift example when preparing a rebuild. That is a gearbox-assembly discussion; the post does not establish that the electronics are Bosch 0260550041. Match the complete mechatronic and parts catalogue for the actual vehicle rather than ordering by this account alone.
A 2012 LR4 owner's 6HP28 service thread describes difficulty reaching the connector sleeve. It is a useful example of access constraints, not proof of the controller part number or a complete installation procedure.