Diesel injector test benches evaluate removed injectors using controlled test oil, a suitable injector drive and measurements taken against an injector-specific test plan. Depending on the machine and configuration, they can assess delivery, return flow, leakage, response and other characteristics; some support approved calibration or coding. A bench result is evidence about the injector under the stated test conditions, not a complete diagnosis of the vehicle's fuel system.
How a common-rail injector bench works
An enclosed test station secures the injector using the specified holder, sealing pieces and hydraulic and electrical adapters. A controlled pump and rail supply filtered test oil at the specified pressure. The correct solenoid or piezo driver commands a defined test sequence, while calibrated measuring equipment records delivery and return quantities at selected points. The machine compares results with the available plan and may produce a report. Test-oil temperature, pressure, injection count, electrical drive, settling time and measurement method all affect results. Bosch describes automatic test cycles and part-number-based test data for its EPS and DCI equipment.
- Delivery at several operating points: quantity per stroke or other units defined by the plan at its specified rail pressure and pulse. Uneven or out-of-tolerance delivery can support a diagnosis of an injector fault; it does not by itself identify the faulty internal part.
- Return or back-leak: the fluid returned from the injector under defined conditions. Excess or abnormal return can be associated with wear or leakage, but interpretation requires the relevant limits and test conditions.
- Sealing and leakage: tests for unwanted delivery, internal leakage or external leaks as defined by the bench and injector procedure. Different tests observe different leakage paths.
- Response or opening characteristics: some benches and plans assess reaction timing, minimum drive pulse, nozzle opening pressure or other features. A measured or calculated parameter is only meaningful for the supported injector and method. Hartridge HJ084.
Compare with the exact manufacturer or validated test plan and record measured units, pressure, temperature, drive, injection count and tolerance. A comparative screening result is not automatically equivalent to an authorised repair-quality test. No single return-flow, resistance or spray observation proves the complete condition of an injector.
Injector types and related machines
- Common rail: solenoid and piezo injectors require matching high-pressure connections and an appropriate electrical driver. Support for one family does not imply support for another; newer pressure-conversion designs can require specific hardware and plans.
- Mechanically actuated unit injectors and unit pumps: suitable test systems use a powered cam box to reproduce mechanical actuation together with the correct hydraulic and electrical equipment. A common-rail-only bench cannot be assumed to drive these. Hartridge HK1400 Expert.
- HEUI: hydraulically actuated electronically controlled injectors need appropriate high-pressure actuation oil and control equipment; their test arrangements differ from common rail. Hartridge Toledo HEUI Master.
- Conventional mechanical nozzles: dedicated nozzle-holder or pop testers can check prescribed opening pressure, sealing and spray characteristics. They are not substitutes for a full electronic common-rail bench. Bosch distinguishes the EPS 100 nozzle-holder tester from its DCI benches.
Calibration codes and authorisation
Some injector families use an individual correction code that tells the ECU how to compensate for measured injector characteristics. Test, repair and code generation may require specific test points, hardware, current data, manufacturer authorisation and a supported licence. A displayed generic code or “all makes” claim does not establish OEM-equivalent coding. Do not invent a code or reuse one after a repair that requires recalibration. Enter the correct code in the correct cylinder position when the vehicle procedure requires it, then carry out any specified adaptations. Delphi documents one C2i/C3i test, repair and vehicle-programming example; it is not a universal procedure. Hartridge coding guidance.
Bench makes, models and part numbers
Model coverage varies with software, test plans, fixtures, pressure and machine version. Listed historical equipment is not necessarily discontinued. Where a number identifies a software package or accessory, it is labelled accordingly; check the machine nameplate, supply and current support.
- Bosch DCI 200 — 0 683 225 001: single-injector common-rail bench. Bosch's equipment catalogue lists IMA/NIMA coding and separate CRIN and third-party CRI adapter kits, including 1 687 010 207 and 1 687 010 208. Coding and coverage remain injector- and configuration-specific.
- Bosch DCI 700 — 0 683 725 001 / 0 683 725 002: common-rail injector bench; Bosch lists these different configuration numbers in its Turkish and Philippine equipment catalogues. Confirm voltage and configuration with Bosch. Its diesel brochure describes four-injector handling, online test plans and IMA/NIMA coding for supported applications.
- Bosch EPS 205 — 0 683 803 205 / 0 683 803 206: automatic common-rail injector and conventional nozzle-holder tester. The Bosch brochure identifies 400 V and 200 V three-phase variants respectively and pressure generation up to 1,800 bar. Suitable accessories and software determine injector coverage.
- Bosch EPS 708 — 0 683 708 020 / 0 683 708 021: common-rail pump and injector bench. Bosch lists these as 400 V and 200–240 V three-phase versions with cooling; its brochure describes up to 2,200 bar. Alternative configuration numbers omit the cooling system.
- Bosch EPS 118: compact automatic common-rail injector tester, described with graphical and numerical results and a test-data database in the Bosch diesel brochure. Confirm exact variant and test plan before buying.
- Bosch EPS 200: an earlier injector-testing platform documented in Bosch's 2020 training material. Check its actual installed adapters, test data, software and service support; do not assume EPS 205 capabilities.
- Hartridge Sabre CRi Master and Expert: common-rail injector benches. Hartridge dates the Master to 2017; the HJ084 Expert upgrade kit adds capabilities to eligible Master benches and must be installed by a trained technician. HJ084 is an upgrade part number, not a bench number.
- Hartridge CRi-Pro: four-line common-rail bench introduced in 2022. Its brochure specifies testing up to 2,700 bar and distinguishes all-makes from authorised functions. The Hartridge download centre identifies A318A600 as a software package and A318A601 as test data, not machine part numbers.
- Hartridge CRi-PC: earlier common-rail platform; Hartridge's 2017 test-plan listing identifies A248A600 as test-plan software. Verify current supported injector and coding coverage rather than extrapolating from CRi-Pro.
- Hartridge AVM2-PC with HK1400 Expert: powered bench and cam-box solution for supported EUI, EUP and HPI units. HK1415 is an AE75 controller; HK1412 is a supply-pressure kit. The software notes distinguish AE75 from older AE65/1 compatibility.
- Carbon Zapp MTBR-X: modular diesel system bench whose brochure lists common-rail injectors and pumps and optional HEUI/EUI functions. Its published Continental programme information also identifies ITB.1R-X and ITB.4R-X benches. Required options and approved programme coverage must be verified.
- Carbon Zapp CRU.2R: earlier common-rail diesel bench named in a 2018 Continental/VDO repair-programme announcement. The announcement limits authorised repairs to authorised partners; ownership alone does not confer approval.
- Delphi / Hartridge YDT35 and YDT35-B: earlier common-rail screening equipment in Delphi's 2020 training prospectus. Delphi describes YDT-35 as a preliminary go/no-go tool; it is not a full repair-quality flow bench or a coding system.
Workshop workflow and interpretation
- Record symptoms, fault codes, injector identifiers and cylinder positions. Diagnose supply pressure, contamination and electrical faults on the vehicle using the relevant procedure; an injector bench cannot identify every cause of a misfire.
- Remove and transport injectors with the manufacturer's cleanliness, sealing and high-pressure precautions. Record the original correction codes. Identify the precise injector and confirm the test plan, fixtures, software and authorisation before fitting it to the bench.
- Inspect and prepare the equipment, guard and adapters. Run the specified test sequence and compare all points with the correct limits, taking account of machine calibration and test conditions. A preliminary screen or generic plan is not a substitute for the appropriate full test.
- Only carry out repair, cleaning and coding permitted by the injector maker and workshop programme. Where a repair changes the code, use the approved process and record the new code. Refit with specified seals and hardware, enter codes in their correct cylinder positions and perform required adaptations.
- Verify the repair on the vehicle and investigate the source of any contamination before returning injectors to a contaminated system. Retain the test report and unresolved findings.
Choosing or maintaining a bench
Check the exact injector families, authorised and independent test plans, support for solenoid and piezo types, available correction-code functions, required fixtures, oil and filtration, calibration and measurement uncertainty. Consider electrical supply, cooling, compressed air, footprint, software subscriptions, licensing and spare parts. Older machines can remain useful within their validated coverage, but verify service support, calibration status, guard integrity and upgrade compatibility. Maximum pressure or injector count alone does not establish diagnostic accuracy.
Safety
- High-pressure fuel and test oil can penetrate skin and cause serious injury. Never open or tighten a pressurised connection or search for a leak with a hand. Use the enclosure and the manufacturer's shutdown and depressurisation procedure. Suspected fluid injection requires immediate emergency medical attention.
- Injector drivers can carry hazardous voltages; some piezo circuits can retain charge. Use only approved leads, isolation and discharge procedures. Do not apply a generic 12 V pulser or noid light to an unidentified diesel injector.
- Use the approved test oil and clean, rated pipes, clamps and adapters; control mist, heat, moving parts and fire hazards. Follow the bench, injector and vehicle service instructions and ensure technicians are trained for the equipment.
Related pages
Injector cleaning and flow testing machines · Injector testers and noid lights · Fuel pressure testers · Delphi common-rail diesel injector part numbers · Fuel injector catalogue
See also: Automotive diesel injection pump test benches for conventional and common-rail pump testing, equipment and diagnostic limitations.
See also: Automotive diesel injector leak-off and return flow testers for test equipment, interpretation, pressure requirements and documented part numbers.
See also: Automotive diesel injector nozzle and pop testers for mechanical nozzle checks, equipment and documented part numbers.
See also: Automotive diesel fuel contamination and water-in-fuel testers for sampling, screening methods, equipment and diagnostic limits.
See also: Automotive diesel injector removal and extraction tools for puller types, application-specific equipment and service considerations.