The Am29BL162C is a 16 Mbit parallel burst NOR flash. Its full array is 2 MiB, organised as 1,048,576 sixteen-bit words. The AMD/Spansion datasheet specifies a 3.0–3.6 V supply for read, program and erase, and a 56-pin SSOP package. Data, address and control inputs are 5 V tolerant; that is not a 5 V supply rating.
ECU evidence
A published service-file posting identifies an Am29BL162 in a 2006 Cadillac CTS 2.8 V6 Bosch ME9.6/E55, ECU 0 261 209 054, alongside an MPC564. This is a single reported unit, not proof that every ME9.6 uses that memory. Service-file listing.
Green Technology Devices lists Am29BL162 among the external flash devices supported by its MPC5xx ECU tool. Flashtec records adding recognition of the part in a BDM software update; the surrounding ECU entries do not establish that every listed ECU contains it. VF2 specifications; Flashtec revision history.
Identification and handling
The C datasheet describes bottom-boot sectors and a device that starts in asynchronous mode before burst mode is enabled. It is a different capacity and bus width from 32-bit burst devices such as the M58BW32F. Compare full part number, voltage, package, sector arrangement, bus and command set against the board and programmer documentation; a shared burst description is not a replacement specification.
A direct 2 MiB device image and a diagnostic, BDM or processor image need not have the same scope or ordering. Record the ECU identification, marking, read method and file size and retain the original read. See also Burst flash on PowerPC controllers.