Identity and evidence
DCM 3.4 is a Delphi diesel control-module designation. Delphi's 2007 common-rail manual lists generation 3.4 with 128 paths, three connectors and 32-bit Delco electronics. It names PSA DW10B and Renault K9 Euro 5 in that generation table. The historical description does not establish the connectors, processor or emissions standard of every unit subsequently listed as DCM 3.4. See the DCM generation overview.
Application examples
Snap-on's 19.2 diagnostic coverage guide lists DCM 3.4 for Dacia Logan 2009–2012 with the K9K 1.5 diesel and Renault Scenic III 2008–2012 K9K 1.5 diesel. Its Logan table also lists DCM 1.2, DCM 3.4-4C and controllers from other families. These are historical coverage entries, not a guarantee that any particular vehicle has a given controller. Dacia Logan coverage; Snap-on 25.4 Renault coverage.
The generation row and diagnostic guide describe different evidence and should not be used as exhaustive fitment lists. Confirm the fitted ECU label and diagnostic identification, vehicle details, hardware and software before selecting a replacement, file or procedure. DCM 3.4-4C and DCM 3.4(+) are labels used by tool vendors; the shared prefix alone does not establish interchangeability.
Processor and tool coverage
AutoTuner labels one supported group DCM3.4(+) with SH7058/SH7059 microcontrollers and lists OBD read and write for that group. This is its stated coverage for supported configurations, not a universal claim about every DCM 3.4. Match the exact vehicle and controller to the current tool documentation. AutoTuner also lists DCM3.4 in its Renault-group manufacturer-specific datalogging feature. DCM3.4(+) tool page; Renault-group datalogging announcement.
Injector coding and adaptations depend on the vehicle and ECU software. Use the vehicle-specific diagnostic procedure and record the original configuration; do not assume that instructions for DCM 1.2 apply to DCM 3.4.
Sources
- Delphi France SAS, Common Rail Manual DDGX200(EN), issue 1, September 2007, DCU generation table, as recorded in the existing DCM overview. The linked mirror was unavailable when checked on 17 November 2026.
- Snap-on, 19.2 vehicle coverage guide (PDF mirror, 40 MB), April 2019, Dacia and Renault engine management applications; Renault Scenic entries are on PDF page 492. See also 25.4 diesel coverage. Tool coverage is not a definitive build record.
- AutoTuner, Delphi DCM3.4(+) SH7058/SH7059 and Renault-group specific datalogging; accessed 17 November 2026. Tool features and coverage can change.