Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Protocols
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Construction machinery

MiC 4.0 BUS is an interface for communication between a construction machine (the carrier) and connected attachments. It standardizes data exchange such as attachment identity, operating status and control information, and includes rules for attachment operation, quick-coupler monitoring and an overarching safety concept.

Construction carrier machine communicates over a dedicated MiC 4.0 CAN network with up to three attachments
MiC 4.0 project overview: one carrier and up to three attachments. Follow the current interface specification.

The MiC 4.0 project describes a dedicated CAN line using J1939-based addressing and message mapping. A 2025 CAN in Automation overview reports 250 kbit/s and example source addresses 0x93 for a rotator and 0xC2 for a hammer; these are profile-specific examples, not general J1939 address assignments. The MiC 4.0 website currently lists protocol version 1.1.0 as a draft. Check the current project release and machine manual before implementation. This interface covers machine-to-attachment communication, not generic service diagnostics.

Sources