Removed text is struck through; added text is highlighted.
ISO 11992 is a CAN-based network family for exchanging digital information across the electrical connection between a towing vehicle and its trailer. Part 1 specifies physical and data-link layers for the network interfaces. Part 4 specifies diagnostic communication for towing and towed vehicles with a maximum authorized total mass above 3,500 kg.
Conceptual tractor-to-trailer communication path; connector and gateway implementation depend on the vehicle.
ISO 11992 diagnostic communication uses vehicle gateways to reach ECUs across the vehicle connection. It is related to, but not interchangeable with, an in-vehicle J1939 diagnostic link. Use the correct ISO 11992 part, vehicle documentation and approved tester for a particular combination. No generic request/reply frame is included here.
Sources
ISO 11992-1:2019, physical and data-link layers.ISO 11992-4:2023, diagnostic communication.
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: ISO 11992 truck-trailer CAN
ISO 11992 is a CAN-based network family for exchanging digital information across the electrical connection between a towing vehicle and its trailer. Part 1 specifies physical and data-link layers for the network interfaces. Part 4 specifies diagnostic communication for towing and towed vehicles with a maximum authorized total mass above 3,500 kg.
Conceptual tractor-to-trailer communication path; connector and gateway implementation depend on the vehicle.
ISO 11992 diagnostic communication uses vehicle gateways to reach ECUs across the vehicle connection. It is related to, but not interchangeable with, an in-vehicle J1939 diagnostic link. Use the correct ISO 11992 part, vehicle documentation and approved tester for a particular combination. No generic request/reply frame is included here.
ISO 11992 is a CAN-based network family for exchanging digital information across the electrical connection between a towing vehicle and its trailer. Part 1 specifies physical and data-link layers for the network interfaces. Part 4 specifies diagnostic communication for towing and towed vehicles with a maximum authorized total mass above 3,500 kg.
Conceptual tractor-to-trailer communication path; connector and gateway implementation depend on the vehicle.
ISO 11992 diagnostic communication uses vehicle gateways to reach ECUs across the vehicle connection. It is related to, but not interchangeable with, an in-vehicle J1939 diagnostic link. Use the correct ISO 11992 part, vehicle documentation and approved tester for a particular combination. No generic request/reply frame is included here.