Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
CAN bus
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

For diagnostic services and message framing, see UDS over CAN and ISO-TP on CAN.

Legislated emissions diagnostics and manufacturer enhanced diagnostics share the physical diagnostic connector on modern vehicles, using either 11-bit standard or 29-bit extended CAN arbitration identifiers carried over ISO-TP (ISO 15765-2).

Legislated 11-bit OBD-II CAN IDs (ISO 15765-4)

ISO 15765-4 reserves 17 eleven-bit CAN identifiers for legislated emissions diagnostics at 500 kbit/s or 250 kbit/s. Functional requests address all emission-related controllers simultaneously; physical requests address a single ECU, whose response identifier is always Request ID + 0x08.

Hex ID Decimal Direction & Addressing Assigned ECU / Role Notes
0x7DF2015Tester → All ECUs (Functional)Functional broadcast requestAll legislated OBD ECUs listen and reply on their own response ID
0x7E02016Tester → ECU #1 (Physical)Engine Control Module (ECM / DME)Strongly recommended by ISO 15765-4
0x7E82024ECU #1 → Tester (Physical)Engine Control Module response0x7E0 + 0x08
0x7E12017Tester → ECU #2 (Physical)Transmission Control Module (TCM / TCU)Strongly recommended by ISO 15765-4
0x7E92025ECU #2 → Tester (Physical)Transmission Control Module response0x7E1 + 0x08
0x7E22018Tester → ECU #3 (Physical)Legislated OBD ECU #3 (e.g. Hybrid / ABS)Manufacturer-assigned within OBD pool
0x7EA2026ECU #3 → Tester (Physical)Legislated OBD ECU #3 response0x7E2 + 0x08
0x7E32019Tester → ECU #4 (Physical)Legislated OBD ECU #4Manufacturer-assigned within OBD pool
0x7EB2027ECU #4 → Tester (Physical)Legislated OBD ECU #4 response0x7E3 + 0x08
0x7E42020Tester → ECU #5 (Physical)Legislated OBD ECU #5Manufacturer-assigned within OBD pool
0x7EC2028ECU #5 → Tester (Physical)Legislated OBD ECU #5 response0x7E4 + 0x08
0x7E52021Tester → ECU #6 (Physical)Legislated OBD ECU #6Manufacturer-assigned within OBD pool
0x7ED2029ECU #6 → Tester (Physical)Legislated OBD ECU #6 response0x7E5 + 0x08
0x7E62022Tester → ECU #7 (Physical)Legislated OBD ECU #7Manufacturer-assigned within OBD pool
0x7EE2030ECU #7 → Tester (Physical)Legislated OBD ECU #7 response0x7E6 + 0x08
0x7E72023Tester → ECU #8 (Physical)Legislated OBD ECU #8Manufacturer-assigned within OBD pool
0x7EF2031ECU #8 → Tester (Physical)Legislated OBD ECU #8 response0x7E7 + 0x08

Legislated 29-bit OBD-II CAN IDs (ISO 15765-4)

Vehicles using 29-bit extended identifiers (commonly Honda/Acura legacy buses, heavy-duty vehicles, and some FCA/J1939-derived architectures) use ISO 15765-2 normal fixed addressing with priority 0x18 (6) and tester source address 0xF1.

Hex ID Decimal Format / Byte Layout Role
0x18DB33F1417018865Priority 0x18, Type 0xDB (Functional), TA 0x33, SA 0xF1Functional broadcast request from external test equipment
0x18DAxxF1416940273 + (xx × 256)Priority 0x18, Type 0xDA (Physical), TA xx, SA 0xF1Physical request from tester (0xF1) to ECU address xx (e.g. 0x18DA10F1 for ECM 0x10)
0x18DAF1xx417001728 + xxPriority 0x18, Type 0xDA (Physical), TA 0xF1, SA xxPhysical response from ECU address xx to tester (0xF1) (e.g. 0x18DAF110)

Manufacturer UDS and Enhanced Diagnostic CAN IDs

Outside the legislated 0x7DF–0x7EF pool, ISO 14229 (UDS) does not mandate fixed CAN identifiers; OEMs assign request/response pairs per module or route requests through a central gateway. Common documented ranges include:

  • 11-bit OEM UDS pairs (0x700–0x7FF): Many OEMs (such as Ford, Mazda, Hyundai/Kia, Toyota, Volvo, VAG, and GM) place non-OBD module UDS pairs in 0x700–0x7DF with responses at Request + 0x08 (for example, Volvo CEM 0x726/0x72E, PSCM 0x730/0x738, FSM 0x764/0x76C; Hyundai/Kia & Toyota ADAS/ABS modules).
  • VAG legacy transport: Pre-UDS Volkswagen Group CAN modules use VW TP 2.0 (channel setup on 0x200 + logical address) before migrating to ISO-TP / UDS on later PQ35/PQ46 and MQB platforms.
  • BMW UDS / KWP over CAN: E-series and F-series gateways use extended or structured addressing (for example 0x6F1 tester requests with target-address byte in byte 0, and module replies in 0x600 + source address).

Sources