Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Tuning
Parent
Bosch MED9.1
Applies to
Bosch MED9.1
Tool groups
None
Manufacturers
Audi, Volkswagen

This guide covers the transverse, belt-driven 2.0 TFSI EA113. Volkswagen identifies the AXX engine in the early Golf GTI and Audi A3 Sportback as Bosch MED9.1; confirm the engine code, ECU, original turbo, steering position and production date before ordering. Similar model names also used different engines, including chain-driven EA888 versions; a model year alone does not establish fitment. Volkswagen SSP 337, page 6.

From the 200 hp K03 car to K04

The early 200 hp Golf GTI is one documented K03 conversion starting point. For context, BorgWarner describes a K03 on the earlier 2.0T A3 and a K04 on the factory 265 bhp Audi S3; the factory S3 is a different engine specification, so fitting its turbo alone does not reproduce the whole car or guarantee 300 hp. BorgWarner Turbo News 2006.

One published example is Unitronic's 2006–2008, 200 hp GTI package: a K04-0064 with its Stage 2+ calibration, advertised at 335 hp and 335 lb-ft, a claimed gain of 135 hp. That is a supplier's complete-package claim, not an independently verified result for every car. The supplier requires an upgraded high-pressure fuel pump and its 3-inch downpipe; it recommends an intake and intercooler. The turbo and calibration alone do not constitute the complete specified configuration. Unitronic K04 package and hardware requirements.

Turbo options and what is included

Make and partFitment and specificationContents and important exclusions
Unitronic K04 upgradeTransverse 2.0 TFSI; the linked application is 2006–2008 GTI 200 hp. Genuine BorgWarner K04-0064. Advertised 335 hp / 335 lb-ft on the supplier's setup.Includes turbo, matching Stage 2+ software, external diverter-valve relocation adapter, silicone hoses, wiring extension and installation hardware. HPFP upgrade and specified downpipe are additional requirements; intake and intercooler recommended. Home flashing cable is separate.
APR T2100011 K04-64 systemTransverse EA113; APR lists applications including 2006–2009 GTI and A3, subject to exact engine fitment. BorgWarner K04-64 with APR-modified compressor cover.Turbo, hoses and mounting hardware; diverter valve mounts in the modified compressor cover. ECU software is not included. For APR software the seller lists HPFP, specific injectors, intake, intercooler, exhaust hardware, plugs and transmission software, with possible internal upgrades. APR labels this product racing use only in its US listing.
Turbo Technics S264 hybridK04-based hybrid for listed EA113 applications including BHZ and CDL, 2006–2014; up to 450 bhp capable as claimed by the maker. CNC reprofiled K04 housings, T36 billet compressor, full-size K16 turbine and upgraded bearing system.A turbo upgrade, sold exchange or as a conversion of a supplied unit, rather than a complete installation and tuning package. Direct fit for specified factory K04 applications; maker says K03 vehicles require diverter-valve relocation. Remap, induction, intercooler, exhaust and fuel supply upgrades are its stated minimum supporting modifications. Verify all conversion parts and vehicle fitment with supplier.
CTS Turbo EA113-BOSS-500Timing-belt EA113 in listed Mk5 GTI/Jetta, Mk6 Golf R and 8P A3/S3 applications. CTS lists a Gen2 GTX 50/67 dual-ball-bearing CHRA, eight-blade billet compressor and approximately 0.63 A/R exhaust housing. It claims 400–500 hp capability depending on fuel and engine modifications.Includes turbo and CTS housing, wastegate bracket, silicone couplers, oil and coolant lines and hardware. CTS specifies its intake and factory or CTS outlet pipe; Golf R/S3 need a DV blanking plate. Tuning and required supporting hardware must be arranged for the actual build. CTS says it does not fit right-hand-drive vehicles.

These are published manufacturer claims, not guaranteed outputs. Claimed turbo capability is not the same as wheel power, and figures from different fuels, dynos and test conditions are not directly comparable. Availability, included software, fitment and emissions approval can change; check the exact current product listing and local road-use rules.

Plan the conversion as a system

  1. Identify the starting hardware: check engine/ECU identity and turbo part number, manifold and exhaust flange, charge and intake hoses, oil and coolant connections, and available clearance. A transverse K04 kit must not be assumed to fit a longitudinal car. Confirm if the chosen kit integrates the diverter valve or needs a separate relocation.
  2. Fuel and calibration: use a calibration matched to the actual turbo, injectors, intake, fuel and ECU software. APR lists an uprated HPFP and Bosch HDEV1 injector set MS100041 or 06F 906 036 F for its own software, but Unitronic's linked kit has different published requirements. Do not mix requirements or maps between suppliers. Direct-injection HPFP capacity and electric low-pressure supply are separate constraints; larger systems may need upgrades to both, determined by the tune and logged delivery. MED9.1 fuel pressure and logging; injector calibration and injection windows.
  3. Condition and thermal capacity: address pre-existing faults, leaks and cooling problems. Check the high-pressure pump follower and cam lobe on affected EA113s: Volkswagen's bulletin covers specific BPY vehicles and says to diagnose low-pressure faults first. Volkswagen bulletin V151401 / 2015153. Choose the intercooler, intake and exhaust to suit the supplier's package and local requirements.
  4. Torque and verification: assess clutch or gearbox capability and any matching transmission calibration. On the completed setup log requested and actual boost, lambda and high-pressure fuel rail, as well as low-pressure supply, intake temperature and ignition corrections, using valid channels for that ECU. Investigate pressure shortfalls or knock before increasing load. Torque and boost checks; DSG torque reporting.

Product specifications and fitment are taken from the linked manufacturers' descriptions, accessed 17 November 2026. These are application examples rather than a complete list; no hardware testing by the wiki is implied.