Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Tuning
Parent
Simos 18
Applies to
Simos 18.1
Tool groups
None
Manufacturers
Volkswagen Group

Changes from revision 3 to revision 3

Removed text is struck through; added text is highlighted.

Choose a topic

The detailed Simos 18 material is maintained on separate pages. Each distinguishes documented factory-function identifiers from patch-specific names, with the ECU software and source scope stated on the page.

Simos 18 switchable maps — slot selection and map names in two different patch implementations.Simos 18 pops and bangs — activation, conditions, ignition and fuel-cut patterns.Simos 18 crackle tuning — duration, spark transitions, controls and logging.Simos 18 DSG shift sounds — gearshift request, engine/gearbox coordination and shift-specific names.Simos 18 exhaust flap control and sound tuning — sound-path flap setpoints, mode selection and actuator diagnosis.

“Crackle” and “bang” describe sounds; the available references do not establish separate factory map families for them. Gearshift and overrun requests are distinct paths in the cited Simos 18.1 example. Exact support depends on the ECU and gearbox software and any installed patch.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 3: Simos 18 map switching, crackles and DSG shift sound

Choose a topic

The detailed Simos 18 material is maintained on separate pages. Each distinguishes documented factory-function identifiers from patch-specific names, with the ECU software and source scope stated on the page.

“Crackle” and “bang” describe sounds; the available references do not establish separate factory map families for them. Gearshift and overrun requests are distinct paths in the cited Simos 18.1 example. Exact support depends on the ECU and gearbox software and any installed patch.

Revision 3: Simos 18 map switching, crackles and DSG shift sound

Choose a topic

The detailed Simos 18 material is maintained on separate pages. Each distinguishes documented factory-function identifiers from patch-specific names, with the ECU software and source scope stated on the page.

“Crackle” and “bang” describe sounds; the available references do not establish separate factory map families for them. Gearshift and overrun requests are distinct paths in the cited Simos 18.1 example. Exact support depends on the ECU and gearbox software and any installed patch.