Simos 19.7 is a Continental engine-management variant documented in a longitudinal 2.0 TFSI application. Its vehicle, engine generation and programming support must be established for the specific controller; the family’s Simos 19.6 EA888 Evo4 examples do not automatically describe this variant.
A manufacturer identification example
SAIC Audi’s A7L control-unit identification list records diagnostic address 0001 as Simos 19.7 for a longitudinal 2.0-litre four-cylinder EA888 Gen3 TFSI, platform MLB58, 180 kW and DL382-7F/7A transmission. Its example identification is part number 4K0 906 259 S, hardware H08 and software Y114. The list says the entries are reference information and directs the reader to ODIS for details. This is one documented market-specific identification, not a complete A7L or worldwide fitment list.
Record the actual diagnostic identification, ECU hardware and software, engine code, gearbox and vehicle configuration before choosing a definition or operation. Similar-looking part numbers and versions do not establish that files or maps are interchangeable. The manufacturer record identifies the controller and application; it does not publish tuning-map names, addresses, axes or safe values.
Programming-tool evidence
In its 29 October 2026 bFlash V2610C release, bFlash lists 19.2, 19.7 and 19.8 for an OBD virtual-read protocol on specified MLB Evo 2.0 TSI/TFSI mild-hybrid and plug-in-hybrid applications. The release lists models at group level, not an individual ECU-to-vehicle compatibility matrix, and calls the protocol beta. It says a full flash is available on request; that is a supplier-specific offer, not proof of a physical full read, EEPROM access or support for a particular Y114 unit. Confirm the exact ECU and software, protocol version and operations with the provider.
For a separate historical product example, a March 2024 reproduction of Magic Motorsport’s Flex 6.51 release describes 19.7 OBD virtual read and map-area write, checksum calculation and certain software updates. It lists selected Audi applications, but does not establish support for every calibration. A virtual read retrieves a supplied matching software image rather than proving what modifications are currently in the ECU; a map-area file is not automatically a full flash or EEPROM backup. Check current tool coverage, file provenance and a suitable recovery method before writing.
Example definition and file identification
A commercial SIMOS19.7 map-pack listing identifies a 2.0T DMTA example with part number 4K0906259E, software number 372668 and version 0003. The advertised groups include torque request and limits, torque monitoring, fuel rail pressure, boost and air models, ignition and lambda. These are the seller’s categories, not public verification of map names, axes, conditions or their effect. Its claim that the maps are verified has not been independently checked here; the project is not a tuned calibration and the public listing does not supply a complete definition.
Another file catalogue lists 4K0906259E 0003 as an Audi A5 2.0 example, but leaves its hardware and software fields blank. A shared part/version string is a useful lead, not proof that the two offered files, vehicle fitment, definition or recovery data are identical. Compare the complete actual ECU identity and file, including the software number, with the provider’s documented match. An embedded original calibration in a project is not automatically an ECU-specific full flash or EEPROM backup.
Calibration and logging
Use a definition verified for the actual software and validate its map boundaries, units and function. The published sources here do not establish that Evo4 RaceROM maps, boost-pressure scaling or logging channels apply to longitudinal 19.7. Establish a fault-free baseline, document hybrid and transmission configuration, and where supported compare requested and reported torque, pressure targets and measurements, lambda, fuel pressure, ignition corrections and temperatures under repeatable conditions. Confirm logger definitions and whether values are measured or modelled. Engine request, system output and gearbox limits are different quantities, especially on a hybrid; do not infer the hybrid system’s combined output from an engine ECU channel alone.
For context about diagnostic signals and calibration methods on a different application, see the Simos 19 family overview. Treat application-specific guidance as a comparison, not a transferable definition.
Sources
- SAIC Audi A7L control-unit identification information. Manufacturer identification list for the stated 19.7 example; consult current ODIS data. Accessed 17 November 2026.
- bFlash V2610C Simos 19.2/19.7/19.8 update, 29 October 2026. Product-specific beta OBD virtual-read coverage and full-flash offer. Accessed 17 November 2026.
- Flex 6.51 release reproduced by Evolved Tuning, 4 March 2024. Historical vendor protocol and application examples. Accessed 17 November 2026.