Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Simos 19
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Simos 19.2 is a Continental petrol engine-management variant listed for certain 2.0 TFSI hybrid applications. Identify the controller and software on the actual vehicle before applying a definition or programming procedure; the Simos 19 family also contains different engine and vehicle platforms.

Documented catalogue examples

A Dimsport supported-vehicle list dated March 2025 names Simos 19.2 for examples including an Audi Q5 80A 2.0 TFSI hybrid and a Q5 55 TFSIe. The list is a product catalogue, not a complete manufacturer fitment record. The listed power of a hybrid vehicle must not automatically be treated as the combustion engine’s standalone output or a tuning target. Verify the vehicle’s actual engine, gearbox, hybrid equipment and diagnostic ECU identification.

simos.app’s SCM7C1 definition page identifies SCM7C1 as Simos 19.2 and lists boxcode 80A906259B without a software version. The provider says known combinations are derived from BIN filenames and that the software identifier must be verified in the loaded file. The entry is a tool-specific compatibility lead; it does not prove a particular vehicle or software version, validate all indexed parameters, or establish flashing support. Match the exact controller, calibration, file and editor definition before use.

Read, edit and write are distinct

bFlash’s V2610C release of 29 October 2026 lists Simos 19.2, 19.7 and 19.8 in a beta OBD virtual-read protocol for specified MLB Evo 2.0 TSI/TFSI mild-hybrid and plug-in-hybrid applications. Its vehicle list is grouped across all three variants. The provider says full flash is available on request; it does not establish physical full-read or EEPROM coverage for every ECU. Confirm the exact hardware, software, licensing, tool version and read, write and recovery operations with the provider.

A virtual read is a supplied matching file, not necessarily a physical copy of the ECU’s current modifications. Record its provenance and the original diagnostic identity, verify the file and checksum handling, and establish what the tool can restore. Editing a BIN in one product is not evidence that the same product can flash it. Do not assume that a map-only read includes EEPROM or all vehicle-specific data.

Calibration and log review

Establish a healthy baseline and record fuel, hardware changes, ECU and transmission software, hybrid state and fault codes. Use supported, correctly defined channels to compare engine torque requests and limits, charge-pressure target and actual, lambda, fuel pressure, ignition corrections and temperatures under repeatable conditions. Hybrid operating mode, battery state and electric-machine contribution affect the interpretation of vehicle output; an engine ECU torque channel alone is not a measurement of total system or wheel output.

No source here supplies validated 19.2 map addresses, universal scaling or safe tuning values. Do not copy map definitions or feature settings from the separately documented transverse EA888 Evo4 applications merely because the ECU family number is similar. Preserve the original file and make a change record with the relevant logs and independently measured results.

Sources