Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Simos 19
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Simos 19.7 is a Continental engine-management variant documented in a longitudinal 2.0 TFSI application. Its vehicle, engine generation and programming support must be established for the specific controller; the family’s Simos 19.6 EA888 Evo4 examples do not automatically describe this variant.

A manufacturer identification example

SAIC Audi’s A7L control-unit identification list records diagnostic address 0001 as Simos 19.7 for a longitudinal 2.0-litre four-cylinder EA888 Gen3 TFSI, platform MLB58, 180 kW and DL382-7F/7A transmission. Its example identification is part number 4K0 906 259 S, hardware H08 and software Y114. The list says the entries are reference information and directs the reader to ODIS for details. This is one documented market-specific identification, not a complete A7L or worldwide fitment list.

Record the actual diagnostic identification, ECU hardware and software, engine code, gearbox and vehicle configuration before choosing a definition or operation. Similar-looking part numbers and versions do not establish that files or maps are interchangeable. The manufacturer record identifies the controller and application; it does not publish tuning-map names, addresses, axes or safe values.

Programming-tool evidence

In its 29 October 2026 bFlash V2610C release, bFlash lists 19.2, 19.7 and 19.8 for an OBD virtual-read protocol on specified MLB Evo 2.0 TSI/TFSI mild-hybrid and plug-in-hybrid applications. The release lists models at group level, not an individual ECU-to-vehicle compatibility matrix, and calls the protocol beta. It says a full flash is available on request; that is a supplier-specific offer, not proof of a physical full read, EEPROM access or support for a particular Y114 unit. Confirm the exact ECU and software, protocol version and operations with the provider.

For a separate historical product example, a March 2024 reproduction of Magic Motorsport’s Flex 6.51 release describes 19.7 OBD virtual read and map-area write, checksum calculation and certain software updates. It lists selected Audi applications, but does not establish support for every calibration. A virtual read retrieves a supplied matching software image rather than proving what modifications are currently in the ECU; a map-area file is not automatically a full flash or EEPROM backup. Check current tool coverage, file provenance and a suitable recovery method before writing.

Calibration and logging

Use a definition verified for the actual software and validate its map boundaries, units and function. The published sources here do not establish that Evo4 RaceROM maps, boost-pressure scaling or logging channels apply to longitudinal 19.7. Establish a fault-free baseline, document hybrid and transmission configuration, and where supported compare requested and reported torque, pressure targets and measurements, lambda, fuel pressure, ignition corrections and temperatures under repeatable conditions. Confirm logger definitions and whether values are measured or modelled. Engine request, system output and gearbox limits are different quantities, especially on a hybrid; do not infer the hybrid system’s combined output from an engine ECU channel alone.

For context about diagnostic signals and calibration methods on a different application, see the Simos 19 family overview. Treat application-specific guidance as a comparison, not a transferable definition.

Sources