ThunderMax 309-466 is a vehicle-specific standalone replacement engine-management kit for fuel-injected Harley-Davidson motorcycles. It replaces the original ECM and connects to the specified vehicle harness; it is not simply a piggyback fuel controller. ThunderMax model documentation.

Application and identification
Harley-Davidson V-Rod models: the product page lists 2002–2017, while the manufacturer document index describes the 309-466 guide as 2002–2014. Manufacturer source.
The two manufacturer listings differ on the end year. Verify the exact year, connector and kit with ThunderMax before installation.
Check the part number, model year, throttle arrangement, vehicle equipment and the manufacturer’s current installation guide. Kit contents and engine compatibility must not be inferred from the common ThunderMax brand or another part number.
Control and installation
ThunderMax describes its replacement systems as using wideband oxygen-sensor feedback and AutoTune. Sensors, adapters, software, basemap and calibration depend on the kit and vehicle. Manufacturer system overview; installation and support documents.
Connector information
This application uses the relevant factory-style vehicle connection and the kit’s associated sensor harness. A complete pin-by-pin schedule for this exact part number has not been verified here; consult the matching installation instructions and identify the connector and harness before wiring. Do not transfer a pinout from another Harley-Davidson model or ThunderMax kit.
Model-specific installation guide
The manufacturer’s 309-466 installation guide, internally labelled version 2016.11.03, identifies 2002–2017 V-Rod applications and describes the 36-pin main ECM connector, the separate oxygen-sensor harness and the communication-port options. It separates the 2002–2005 and 2006-on installation procedures. The support index’s 2002–2014 label is narrower; check the exact motorcycle and current guide before installation. The guide does not list a complete numbered ECM pinout.