Removed text is struck through; added text is highlighted.
ThunderMax 309-460 is a vehicle-specific standalone replacement engine-management kit for fuel-injected Harley-Davidson motorcycles. It replaces the original ECM and connects to the specified vehicle harness; it is not simply a piggyback fuel controller. ThunderMax model documentation.
Manufacturer illustration of the ThunderMax 309-460 kit. Image: ThunderMax manufacturer product listing, reproduced with permission.
Check the part number, model year, throttle arrangement, vehicle equipment and the manufacturer’s current installation guide. Kit contents and engine compatibility must not be inferred from the common ThunderMax brand or another part number.
Control and installation
ThunderMax describes its replacement systems as using wideband oxygen-sensor feedback and AutoTune. Sensors, adapters, software, basemap and calibration depend on the kit and vehicle. Manufacturer system overview; installation and support documents.
Connector information
This application uses the relevant factory-style vehicle connection and the kit’s associated sensor harness. A complete pin-by-pin schedule for this exact part number has not been verified here; consult the matching installation instructions and identify the connector and harness before wiring. Do not transfer a pinout from another Harley-Davidson model or ThunderMax kit.
36-way ECM connector: optional 309-424 pigtail
The ThunderMax accessories catalogue identifies 309-424 as compatible with 309-460; confirm the ECM and accessory revision. The manufacturer’s 309-424 instructions identify the following positions at the wire side of the 36-position ECM harness connector. This is a partial pigtail connection reference, not the complete 309-460 ECU pinout; the guide does not say which data wire is USB D+ or D−.
36-way position309-424 instruction10Black pigtail wire; the guide describes the original black or black/green wire at this position as a redundant ground.16White pigtail wire; originally sealed in the illustrated installation.32Green pigtail wire; originally sealed in the illustrated installation.
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 2: ThunderMax 309-460
ThunderMax 309-460 is a vehicle-specific standalone replacement engine-management kit for fuel-injected Harley-Davidson motorcycles. It replaces the original ECM and connects to the specified vehicle harness; it is not simply a piggyback fuel controller. ThunderMax model documentation.
Check the part number, model year, throttle arrangement, vehicle equipment and the manufacturer’s current installation guide. Kit contents and engine compatibility must not be inferred from the common ThunderMax brand or another part number.
Control and installation
ThunderMax describes its replacement systems as using wideband oxygen-sensor feedback and AutoTune. Sensors, adapters, software, basemap and calibration depend on the kit and vehicle. Manufacturer system overview; installation and support documents.
Connector information
This application uses the relevant factory-style vehicle connection and the kit’s associated sensor harness. A complete pin-by-pin schedule for this exact part number has not been verified here; consult the matching installation instructions and identify the connector and harness before wiring. Do not transfer a pinout from another Harley-Davidson model or ThunderMax kit.
36-way ECM connector: optional 309-424 pigtail
The ThunderMax accessories catalogue identifies 309-424 as compatible with 309-460; confirm the ECM and accessory revision. The manufacturer’s 309-424 instructions identify the following positions at the wire side of the 36-position ECM harness connector. This is a partial pigtail connection reference, not the complete 309-460 ECU pinout; the guide does not say which data wire is USB D+ or D−.
36-way position
309-424 instruction
10
Black pigtail wire; the guide describes the original black or black/green wire at this position as a redundant ground.
16
White pigtail wire; originally sealed in the illustrated installation.
32
Green pigtail wire; originally sealed in the illustrated installation.
Revision 2: ThunderMax 309-460
ThunderMax 309-460 is a vehicle-specific standalone replacement engine-management kit for fuel-injected Harley-Davidson motorcycles. It replaces the original ECM and connects to the specified vehicle harness; it is not simply a piggyback fuel controller. ThunderMax model documentation.
Check the part number, model year, throttle arrangement, vehicle equipment and the manufacturer’s current installation guide. Kit contents and engine compatibility must not be inferred from the common ThunderMax brand or another part number.
Control and installation
ThunderMax describes its replacement systems as using wideband oxygen-sensor feedback and AutoTune. Sensors, adapters, software, basemap and calibration depend on the kit and vehicle. Manufacturer system overview; installation and support documents.
Connector information
This application uses the relevant factory-style vehicle connection and the kit’s associated sensor harness. A complete pin-by-pin schedule for this exact part number has not been verified here; consult the matching installation instructions and identify the connector and harness before wiring. Do not transfer a pinout from another Harley-Davidson model or ThunderMax kit.
36-way ECM connector: optional 309-424 pigtail
The ThunderMax accessories catalogue identifies 309-424 as compatible with 309-460; confirm the ECM and accessory revision. The manufacturer’s 309-424 instructions identify the following positions at the wire side of the 36-position ECM harness connector. This is a partial pigtail connection reference, not the complete 309-460 ECU pinout; the guide does not say which data wire is USB D+ or D−.
36-way position
309-424 instruction
10
Black pigtail wire; the guide describes the original black or black/green wire at this position as a redundant ground.
16
White pigtail wire; originally sealed in the illustrated installation.
32
Green pigtail wire; originally sealed in the illustrated installation.