Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Engine ECU
Parent
ThunderMax standalone motorcycle ECUs
Applies to
ThunderMax standalone motorcycle ECUs
Tool groups
None
Manufacturers
None

ThunderMax 309-485 is a vehicle-specific standalone replacement engine-management kit for fuel-injected Harley-Davidson motorcycles. It replaces the original ECM and connects to the specified vehicle harness; it is not simply a piggyback fuel controller. ThunderMax model documentation.

Manufacturer illustration of the ThunderMax 309-485 kit
Manufacturer illustration of the ThunderMax 309-485 kit. Image: ThunderMax manufacturer product listing, reproduced with permission.

Application and identification

2004–2011 Harley-Davidson Dyna, 2010–2013 Sportster and 2008–2012 XR1200 models as listed on ThunderMax’s product page. Manufacturer source.

ThunderMax also lists a separate 309-464 kit for 2008–2012 XR1200 applications. Confirm the precise kit, module and harness with the manufacturer before selecting a replacement.

Check the part number, model year, throttle arrangement, vehicle equipment and the manufacturer’s current installation guide. Kit contents and engine compatibility must not be inferred from the common ThunderMax brand or another part number.

Control and installation

ThunderMax describes its replacement systems as using wideband oxygen-sensor feedback and AutoTune. Sensors, adapters, software, basemap and calibration depend on the kit and vehicle. Manufacturer system overview; installation and support documents.

Connector information

This application uses the relevant factory-style vehicle connection and the kit’s associated sensor harness. A complete pin-by-pin schedule for this exact part number has not been verified here; consult the matching installation instructions and identify the connector and harness before wiring. Do not transfer a pinout from another Harley-Davidson model or ThunderMax kit.

36-way ECM connector: 309-424 communication pigtail

The ThunderMax 309-485 installation guide calls for the 309-424 USB pigtail on the 36-position ECM harness connector. The 309-424 manufacturer instructions identify the following positions from the wire side. This is a partial communication-harness reference, not a complete ECU pinout; the guide does not identify which of the green or white leads is USB D+ or D−. Verify the actual ECM, pigtail and guide revision.

36-way position309-424 instruction
10Black pigtail wire; the guide describes the original black or black/green harness wire here as a redundant ground.
16White pigtail wire; guide identifies this position as originally sealed in its illustrated installation.
32Green pigtail wire; guide identifies this position as originally sealed in its illustrated installation.