Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
ABS / DSC
Parent
Bosch ABS 8.2 and ESP 8.2i
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Bosch

Changes from revision 3 to revision 3

Removed text is struck through; added text is highlighted.

ABS and traction systems · Bosch systems · Related Bosch family overview

System identification

Volkswagen's Polo 2010 brake repair guide identifies Bosch 8.2i in its ABS/EDS/ASR/ESP section. The same guide separately identifies Bosch 8.2; preserve the complete suffix when selecting documentation. The guide treats left- and right-hand-drive installations separately. VW Polo brake guide contents.

VW Polo 6R integrated sensors and hydraulics

The reproduced VW Polo 6R workshop guide describes 8.2i and 9.0i together. It identifies ABS control unit J104 mounted to hydraulic unit N55; the control unit contains lateral-acceleration sender G200 and yaw-rate sender G202, with longitudinal-acceleration sender G251 depending on equipment. The hydraulic unit includes the return pump V39, brake-pressure sender G201 and the inlet/outlet valve block.

The guide identifies this particular installation in the right side of the engine compartment and says not to separate the pump from the valve block. These locations and components are documented for the Polo installation; verify the exact vehicle, unit and applicable repair procedure before service.

Variant and service limits

The family and equipment names here are from a Polo repair guide and do not guarantee the installed functions or vehicle applicability of every unit labelled 8.2i. Record the supplier and vehicle part numbers, VIN, software and coding, then follow the vehicle-specific procedure for diagnosis, hydraulic work and calibration. The table of contents does not provide a pinout or establish replacement compatibility.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 3: Bosch ESP 8.2i

ABS and traction systems · Bosch systems · Related Bosch family overview

System identification

Volkswagen's Polo 2010 brake repair guide identifies Bosch 8.2i in its ABS/EDS/ASR/ESP section. The same guide separately identifies Bosch 8.2; preserve the complete suffix when selecting documentation. The guide treats left- and right-hand-drive installations separately. VW Polo brake guide contents.

VW Polo 6R integrated sensors and hydraulics

The reproduced VW Polo 6R workshop guide describes 8.2i and 9.0i together. It identifies ABS control unit J104 mounted to hydraulic unit N55; the control unit contains lateral-acceleration sender G200 and yaw-rate sender G202, with longitudinal-acceleration sender G251 depending on equipment. The hydraulic unit includes the return pump V39, brake-pressure sender G201 and the inlet/outlet valve block.

The guide identifies this particular installation in the right side of the engine compartment and says not to separate the pump from the valve block. These locations and components are documented for the Polo installation; verify the exact vehicle, unit and applicable repair procedure before service.

Variant and service limits

The family and equipment names here are from a Polo repair guide and do not guarantee the installed functions or vehicle applicability of every unit labelled 8.2i. Record the supplier and vehicle part numbers, VIN, software and coding, then follow the vehicle-specific procedure for diagnosis, hydraulic work and calibration. The table of contents does not provide a pinout or establish replacement compatibility.

Revision 3: Bosch ESP 8.2i

ABS and traction systems · Bosch systems · Related Bosch family overview

System identification

Volkswagen's Polo 2010 brake repair guide identifies Bosch 8.2i in its ABS/EDS/ASR/ESP section. The same guide separately identifies Bosch 8.2; preserve the complete suffix when selecting documentation. The guide treats left- and right-hand-drive installations separately. VW Polo brake guide contents.

VW Polo 6R integrated sensors and hydraulics

The reproduced VW Polo 6R workshop guide describes 8.2i and 9.0i together. It identifies ABS control unit J104 mounted to hydraulic unit N55; the control unit contains lateral-acceleration sender G200 and yaw-rate sender G202, with longitudinal-acceleration sender G251 depending on equipment. The hydraulic unit includes the return pump V39, brake-pressure sender G201 and the inlet/outlet valve block.

The guide identifies this particular installation in the right side of the engine compartment and says not to separate the pump from the valve block. These locations and components are documented for the Polo installation; verify the exact vehicle, unit and applicable repair procedure before service.

Variant and service limits

The family and equipment names here are from a Polo repair guide and do not guarantee the installed functions or vehicle applicability of every unit labelled 8.2i. Record the supplier and vehicle part numbers, VIN, software and coding, then follow the vehicle-specific procedure for diagnosis, hydraulic work and calibration. The table of contents does not provide a pinout or establish replacement compatibility.