Removed text is struck through; added text is highlighted.
Land Rover and Range Rover Ingenium petrol engines use several distinct air and hybrid systems. This guide covers the 2.0-litre four-cylinder turbo and the 3.0-litre inline-six, including selected mild-hybrid and plug-in-hybrid examples. Identify the exact engine, controller and vehicle before choosing a calibration. General petrol and classic-engine guidance is in Land Rover petrol tuning and ECU identification.
Identify the vehicle and powertrain
ExampleFactory informationImplication for tuning
2017 Range Rover Velar P300 2.0JLR describes a 300 PS, 400 Nm four-cylinder Ingenium petrol with a twin-scroll turbocharger and high-flow compressor. JLR Velar announcement.Compare boost, fuelling, ignition and charge cooling on this engine; do not infer that a lower-output model has identical hardware.
2019 Range Rover Sport 3.0 petrol I6 MHEVJLR lists 355 and 395 US hp variants with 48 V mild hybrid, an electric supercharger and a twin-scroll turbocharger. JLR 2019 I6 announcement.This is a straight-six with an electrically driven compressor, distinct from the earlier mechanically supercharged 3.0 V6. Its engine and electrified systems coordinate torque.
2021 Range Rover Sport P400eJLR describes a plug-in hybrid with a 2.0-litre four-cylinder petrol engine plus an electric motor and a combined power rating. JLR 2021 model announcement.Combined system power is not the petrol engine's standalone output; the hybrid controller and state of charge affect measurements.
Do not identify an engine from the badge alone: later models, markets and powertrain configurations can differ. Record VIN, build date, engine code, induction, transmission, hybrid type and the ECU's complete hardware, software and calibration numbers. A plug-in hybrid requires high-voltage workshop procedures; a 48 V mild hybrid has its own electrical precautions. Use the specific manufacturer's instructions and trained technicians for the work.
ECU identification and example applications
ControllerPublished application exampleScope
Bosch MED17.9.9HexProg's application list includes selected 2.0 petrol Ingenium Discovery, Discovery Sport, Evoque, Range Rover Sport and Velar models. A file seller lists a Defender 2.0 300 hp example with software 10SW014561; the published hardware string is masked as 0261xxxxxx.The model and ECU examples help narrow identification but do not establish a particular car's calibration, connectors or access method. Read the installed ECU.
Bosch MG1CS028AutoTuner's MG1CS028 compatibility listing includes Defender 2020+ P400 3.0 MHEV and Discovery V P360 3.0 MHEV examples.Tool coverage is not a full fitment catalogue. ECU generation, software and access requirements vary; confirm actual ID and recovery support before any programming.
The MED17.9.9 and MG1CS028 wiki links lead to identification hubs, not pinouts for a specific Ingenium installation. Earlier 2.0 Si4 petrol models may use other management: a Bosch MED17.9.7 appears in this seller's related Evoque listings. Do not assume that an older Si4 is Ingenium, or that a similarly named diesel MEDC17.9 is the petrol MED17.9.9.
Baseline and fault diagnosis
Read and record trouble codes from engine, transmission and hybrid systems; inspect live data and address misfires, unstable idle, air leaks and abnormal fuel trims. Record engine, gearbox and hybrid software versions and the fuel actually used.
Check service history, correct oil and cooling-system condition. Inspect intake and charge pipes for loose connections and oil contamination, charge-air cooling for obstruction or leaks, and turbo control for commanded-versus-actual faults. Do not tune around an existing boost leak.
Inspect plugs, coils and fuel-system operation to the engine's specification. Log low- and high-pressure fuel delivery under load, where supported, and investigate pressure shortfall or ignition correction before increasing torque.
Use a suitable four-wheel-drive dyno and manufacturer-appropriate procedures. Document ambient conditions, tyre pressures, drivetrain mode and baseline wheel/estimated engine power consistently. Some hybrid vehicles need special test modes; do not improvise high-voltage procedures.
Calibration and ECU map functions
Maps and strategies differ by software version, and an individual controller may organise these functions differently. Verify axes, units, scaling, signedness, checksums and the active operating mode against definitions and measurement for the exact read. Keep the original vehicle-specific calibration and a supported recovery plan. A calibration-only read is not necessarily a complete ECU recovery image.
FunctionWhat the tuner checksValidation
Driver request, torque model and gear limitsRequested torque, calculated engine torque, speed/load limits and gearbox coordination. Increasing one limiter alone may cause throttle closure, torque monitoring intervention or misleading gearbox torque information.Compare pedal, requested and actual torque, load, throttle angle and shift behaviour.
Turbo and air systemBoost request, wastegate control and pressure/temperature limits; account for actual turbocharger, charge cooling and pressure sensors. I6 electric compressor behaviour involves additional control coordination.Compare requested versus measured manifold pressure through spool, peak and sustained load. Check intake temperature and avoid oscillation or overboost.
Fuel, lambda and direct injectionRequested mixture, injector and rail-pressure strategy, protection enrichment and supply capacity must match engine airflow and fuel.Log lambda target and actual, rail pressure request/actual and misfires; use a suitable independent measurement where available.
Ignition and knock controlBase ignition and corrections depend on speed, load, temperature and fuel. More advance is not automatically more power.Record actual ignition and per-cylinder corrections where available; investigate knock and fuel quality rather than masking corrections.
Cam timing, thermal protection and emissionsVariable valve timing, exhaust-temperature modelling, catalyst and component protection, diagnostics and hybrid/gearbox interventions all affect the usable result.Test starts, part load, hot restarts, shifts and repeat pulls; retain functioning protection and required emissions equipment.
Example with limited identification: a third-party Evoque 2.0 200 hp MED17.9.9 map pack lists seller-labelled torque, gear limits, VVT, injection, spark, turbo and rail groups. Its public listing masks the hardware number and does not state a complete software ID. The labels are illustrative and not factory-validated definitions; the example cannot identify another car or establish universal map addresses. Its preview also illustrates that a map definition is not a tuned file or a full ECU backup.
Upgrade options
Software on standard hardware: develop and validate a calibration for the exact ECU, fuel grade and condition. A stock turbo engine's output may be limited by airflow, temperatures, fuelling, gearbox or factory protection. “Stage 1” is not an industry specification, and figures in advertisements are not guaranteed results.
Charge cooling: repair leaks and restrictions first. A correctly fitted higher-capacity intercooler or heat exchanger may reduce intake temperature under repeated load, subject to airflow and pressure-drop trade-offs. Verify inlet temperature, pressure, fitment and performance on the intended vehicle rather than assuming a larger core adds a fixed amount of power.
Turbocharger and intake: a larger or hybrid turbo needs suitable manifolds, actuator control, intake plumbing, fuel delivery and calibration. Spool, transient response and heat are as relevant as peak flow for a heavy towing or off-road vehicle. Test for leaks and map requested against actual pressure.
Fuel and ignition support: use correct service parts and verify actual system capacity before considering upgraded pumps or injectors. Direct-injection parts need correct characterisation and the right control strategy; hardware changes alone do not assure safe mixture.
Drivetrain and thermal package: check automatic transmission service and torque-management behaviour, transfer case, tyres, brakes and engine cooling for the duty cycle. Do not presume a published torque rating applies to every gearbox variant.
Mild hybrids and plug-in hybrids
The electric supercharger in the JLR 3.0 I6 is not a belt-pulley upgrade. Before modifying boost or torque requests, understand the interactions of the turbo, electric compressor, battery, starter-generator and transmission in the applicable vehicle. Retain diagnostics and thermal limits and check transitions between power sources.
On PHEVs, battery state of charge, temperature and power availability can change the combined output and repeatability of dyno tests. JLR's cited P400e figure is combined engine and electric drive. An engine-only calibration does not automatically deliver an equivalent increase in combined power. High-voltage work must follow the exact vehicle's isolation and competence requirements; do not disconnect orange-cable components as an improvised diagnostic step.
Road and workshop validation
After calibration, check cold start, hot restart, idle, light-load trims, tip-in and lift-off, gear changes and regenerative transitions where applicable. Record requested/actual torque, boost, lambda and fuel pressure, intake and coolant temperatures, spark correction and fault status. Compare repeated runs under controlled conditions and reassess if knock, misfire, temperature, fuel pressure or torque intervention deviates. Allow for normal correction and adaptation; do not treat a single peak as proof of sustained reliability.
Use the intended pump fuel consistently, distinguishing RON from AKI where relevant. Check insurer, emissions and approval requirements for the jurisdiction. Great Britain's MOT inspection guidance covers emissions-equipment inspection and testing. See Discovery Sport, Evoque, Velar and Defender L663 for model context.
See Land Rover engine failures and common problems for sourced timing-drive, crankshaft and Ingenium issues and service checks.
Open each version to inspect formatting, tables and photographs.
Revision 2: Land Rover Ingenium petrol 2.0 and 3.0 tuning guide
Land Rover and Range Rover Ingenium petrol engines use several distinct air and hybrid systems. This guide covers the 2.0-litre four-cylinder turbo and the 3.0-litre inline-six, including selected mild-hybrid and plug-in-hybrid examples. Identify the exact engine, controller and vehicle before choosing a calibration. General petrol and classic-engine guidance is in Land Rover petrol tuning and ECU identification.
Identify the vehicle and powertrain
| Example | Factory information | Implication for tuning |
| 2017 Range Rover Velar P300 2.0 | JLR describes a 300 PS, 400 Nm four-cylinder Ingenium petrol with a twin-scroll turbocharger and high-flow compressor. JLR Velar announcement. | Compare boost, fuelling, ignition and charge cooling on this engine; do not infer that a lower-output model has identical hardware. |
| 2019 Range Rover Sport 3.0 petrol I6 MHEV | JLR lists 355 and 395 US hp variants with 48 V mild hybrid, an electric supercharger and a twin-scroll turbocharger. JLR 2019 I6 announcement. | This is a straight-six with an electrically driven compressor, distinct from the earlier mechanically supercharged 3.0 V6. Its engine and electrified systems coordinate torque. |
| 2021 Range Rover Sport P400e | JLR describes a plug-in hybrid with a 2.0-litre four-cylinder petrol engine plus an electric motor and a combined power rating. JLR 2021 model announcement. | Combined system power is not the petrol engine's standalone output; the hybrid controller and state of charge affect measurements. |
Do not identify an engine from the badge alone: later models, markets and powertrain configurations can differ. Record VIN, build date, engine code, induction, transmission, hybrid type and the ECU's complete hardware, software and calibration numbers. A plug-in hybrid requires high-voltage workshop procedures; a 48 V mild hybrid has its own electrical precautions. Use the specific manufacturer's instructions and trained technicians for the work.
ECU identification and example applications
| Controller | Published application example | Scope |
| Bosch MED17.9.9 | HexProg's application list includes selected 2.0 petrol Ingenium Discovery, Discovery Sport, Evoque, Range Rover Sport and Velar models. A file seller lists a Defender 2.0 300 hp example with software 10SW014561; the published hardware string is masked as 0261xxxxxx. | The model and ECU examples help narrow identification but do not establish a particular car's calibration, connectors or access method. Read the installed ECU. |
| Bosch MG1CS028 | AutoTuner's MG1CS028 compatibility listing includes Defender 2020+ P400 3.0 MHEV and Discovery V P360 3.0 MHEV examples. | Tool coverage is not a full fitment catalogue. ECU generation, software and access requirements vary; confirm actual ID and recovery support before any programming. |
The MED17.9.9 and MG1CS028 wiki links lead to identification hubs, not pinouts for a specific Ingenium installation. Earlier 2.0 Si4 petrol models may use other management: a Bosch MED17.9.7 appears in this seller's related Evoque listings. Do not assume that an older Si4 is Ingenium, or that a similarly named diesel MEDC17.9 is the petrol MED17.9.9.
Baseline and fault diagnosis
- Read and record trouble codes from engine, transmission and hybrid systems; inspect live data and address misfires, unstable idle, air leaks and abnormal fuel trims. Record engine, gearbox and hybrid software versions and the fuel actually used.
- Check service history, correct oil and cooling-system condition. Inspect intake and charge pipes for loose connections and oil contamination, charge-air cooling for obstruction or leaks, and turbo control for commanded-versus-actual faults. Do not tune around an existing boost leak.
- Inspect plugs, coils and fuel-system operation to the engine's specification. Log low- and high-pressure fuel delivery under load, where supported, and investigate pressure shortfall or ignition correction before increasing torque.
- Use a suitable four-wheel-drive dyno and manufacturer-appropriate procedures. Document ambient conditions, tyre pressures, drivetrain mode and baseline wheel/estimated engine power consistently. Some hybrid vehicles need special test modes; do not improvise high-voltage procedures.
Calibration and ECU map functions
Maps and strategies differ by software version, and an individual controller may organise these functions differently. Verify axes, units, scaling, signedness, checksums and the active operating mode against definitions and measurement for the exact read. Keep the original vehicle-specific calibration and a supported recovery plan. A calibration-only read is not necessarily a complete ECU recovery image.
| Function | What the tuner checks | Validation |
| Driver request, torque model and gear limits | Requested torque, calculated engine torque, speed/load limits and gearbox coordination. Increasing one limiter alone may cause throttle closure, torque monitoring intervention or misleading gearbox torque information. | Compare pedal, requested and actual torque, load, throttle angle and shift behaviour. |
| Turbo and air system | Boost request, wastegate control and pressure/temperature limits; account for actual turbocharger, charge cooling and pressure sensors. I6 electric compressor behaviour involves additional control coordination. | Compare requested versus measured manifold pressure through spool, peak and sustained load. Check intake temperature and avoid oscillation or overboost. |
| Fuel, lambda and direct injection | Requested mixture, injector and rail-pressure strategy, protection enrichment and supply capacity must match engine airflow and fuel. | Log lambda target and actual, rail pressure request/actual and misfires; use a suitable independent measurement where available. |
| Ignition and knock control | Base ignition and corrections depend on speed, load, temperature and fuel. More advance is not automatically more power. | Record actual ignition and per-cylinder corrections where available; investigate knock and fuel quality rather than masking corrections. |
| Cam timing, thermal protection and emissions | Variable valve timing, exhaust-temperature modelling, catalyst and component protection, diagnostics and hybrid/gearbox interventions all affect the usable result. | Test starts, part load, hot restarts, shifts and repeat pulls; retain functioning protection and required emissions equipment. |
Example with limited identification: a third-party Evoque 2.0 200 hp MED17.9.9 map pack lists seller-labelled torque, gear limits, VVT, injection, spark, turbo and rail groups. Its public listing masks the hardware number and does not state a complete software ID. The labels are illustrative and not factory-validated definitions; the example cannot identify another car or establish universal map addresses. Its preview also illustrates that a map definition is not a tuned file or a full ECU backup.
Upgrade options
- Software on standard hardware: develop and validate a calibration for the exact ECU, fuel grade and condition. A stock turbo engine's output may be limited by airflow, temperatures, fuelling, gearbox or factory protection. “Stage 1” is not an industry specification, and figures in advertisements are not guaranteed results.
- Charge cooling: repair leaks and restrictions first. A correctly fitted higher-capacity intercooler or heat exchanger may reduce intake temperature under repeated load, subject to airflow and pressure-drop trade-offs. Verify inlet temperature, pressure, fitment and performance on the intended vehicle rather than assuming a larger core adds a fixed amount of power.
- Turbocharger and intake: a larger or hybrid turbo needs suitable manifolds, actuator control, intake plumbing, fuel delivery and calibration. Spool, transient response and heat are as relevant as peak flow for a heavy towing or off-road vehicle. Test for leaks and map requested against actual pressure.
- Fuel and ignition support: use correct service parts and verify actual system capacity before considering upgraded pumps or injectors. Direct-injection parts need correct characterisation and the right control strategy; hardware changes alone do not assure safe mixture.
- Drivetrain and thermal package: check automatic transmission service and torque-management behaviour, transfer case, tyres, brakes and engine cooling for the duty cycle. Do not presume a published torque rating applies to every gearbox variant.
Mild hybrids and plug-in hybrids
The electric supercharger in the JLR 3.0 I6 is not a belt-pulley upgrade. Before modifying boost or torque requests, understand the interactions of the turbo, electric compressor, battery, starter-generator and transmission in the applicable vehicle. Retain diagnostics and thermal limits and check transitions between power sources.
On PHEVs, battery state of charge, temperature and power availability can change the combined output and repeatability of dyno tests. JLR's cited P400e figure is combined engine and electric drive. An engine-only calibration does not automatically deliver an equivalent increase in combined power. High-voltage work must follow the exact vehicle's isolation and competence requirements; do not disconnect orange-cable components as an improvised diagnostic step.
Road and workshop validation
After calibration, check cold start, hot restart, idle, light-load trims, tip-in and lift-off, gear changes and regenerative transitions where applicable. Record requested/actual torque, boost, lambda and fuel pressure, intake and coolant temperatures, spark correction and fault status. Compare repeated runs under controlled conditions and reassess if knock, misfire, temperature, fuel pressure or torque intervention deviates. Allow for normal correction and adaptation; do not treat a single peak as proof of sustained reliability.
Use the intended pump fuel consistently, distinguishing RON from AKI where relevant. Check insurer, emissions and approval requirements for the jurisdiction. Great Britain's MOT inspection guidance covers emissions-equipment inspection and testing. See Discovery Sport, Evoque, Velar and Defender L663 for model context.
Revision 3: Land Rover Ingenium petrol 2.0 and 3.0 tuning guide
Land Rover and Range Rover Ingenium petrol engines use several distinct air and hybrid systems. This guide covers the 2.0-litre four-cylinder turbo and the 3.0-litre inline-six, including selected mild-hybrid and plug-in-hybrid examples. Identify the exact engine, controller and vehicle before choosing a calibration. General petrol and classic-engine guidance is in Land Rover petrol tuning and ECU identification.
Identify the vehicle and powertrain
| Example | Factory information | Implication for tuning |
| 2017 Range Rover Velar P300 2.0 | JLR describes a 300 PS, 400 Nm four-cylinder Ingenium petrol with a twin-scroll turbocharger and high-flow compressor. JLR Velar announcement. | Compare boost, fuelling, ignition and charge cooling on this engine; do not infer that a lower-output model has identical hardware. |
| 2019 Range Rover Sport 3.0 petrol I6 MHEV | JLR lists 355 and 395 US hp variants with 48 V mild hybrid, an electric supercharger and a twin-scroll turbocharger. JLR 2019 I6 announcement. | This is a straight-six with an electrically driven compressor, distinct from the earlier mechanically supercharged 3.0 V6. Its engine and electrified systems coordinate torque. |
| 2021 Range Rover Sport P400e | JLR describes a plug-in hybrid with a 2.0-litre four-cylinder petrol engine plus an electric motor and a combined power rating. JLR 2021 model announcement. | Combined system power is not the petrol engine's standalone output; the hybrid controller and state of charge affect measurements. |
Do not identify an engine from the badge alone: later models, markets and powertrain configurations can differ. Record VIN, build date, engine code, induction, transmission, hybrid type and the ECU's complete hardware, software and calibration numbers. A plug-in hybrid requires high-voltage workshop procedures; a 48 V mild hybrid has its own electrical precautions. Use the specific manufacturer's instructions and trained technicians for the work.
ECU identification and example applications
| Controller | Published application example | Scope |
| Bosch MED17.9.9 | HexProg's application list includes selected 2.0 petrol Ingenium Discovery, Discovery Sport, Evoque, Range Rover Sport and Velar models. A file seller lists a Defender 2.0 300 hp example with software 10SW014561; the published hardware string is masked as 0261xxxxxx. | The model and ECU examples help narrow identification but do not establish a particular car's calibration, connectors or access method. Read the installed ECU. |
| Bosch MG1CS028 | AutoTuner's MG1CS028 compatibility listing includes Defender 2020+ P400 3.0 MHEV and Discovery V P360 3.0 MHEV examples. | Tool coverage is not a full fitment catalogue. ECU generation, software and access requirements vary; confirm actual ID and recovery support before any programming. |
The MED17.9.9 and MG1CS028 wiki links lead to identification hubs, not pinouts for a specific Ingenium installation. Earlier 2.0 Si4 petrol models may use other management: a Bosch MED17.9.7 appears in this seller's related Evoque listings. Do not assume that an older Si4 is Ingenium, or that a similarly named diesel MEDC17.9 is the petrol MED17.9.9.
Baseline and fault diagnosis
- Read and record trouble codes from engine, transmission and hybrid systems; inspect live data and address misfires, unstable idle, air leaks and abnormal fuel trims. Record engine, gearbox and hybrid software versions and the fuel actually used.
- Check service history, correct oil and cooling-system condition. Inspect intake and charge pipes for loose connections and oil contamination, charge-air cooling for obstruction or leaks, and turbo control for commanded-versus-actual faults. Do not tune around an existing boost leak.
- Inspect plugs, coils and fuel-system operation to the engine's specification. Log low- and high-pressure fuel delivery under load, where supported, and investigate pressure shortfall or ignition correction before increasing torque.
- Use a suitable four-wheel-drive dyno and manufacturer-appropriate procedures. Document ambient conditions, tyre pressures, drivetrain mode and baseline wheel/estimated engine power consistently. Some hybrid vehicles need special test modes; do not improvise high-voltage procedures.
Calibration and ECU map functions
Maps and strategies differ by software version, and an individual controller may organise these functions differently. Verify axes, units, scaling, signedness, checksums and the active operating mode against definitions and measurement for the exact read. Keep the original vehicle-specific calibration and a supported recovery plan. A calibration-only read is not necessarily a complete ECU recovery image.
| Function | What the tuner checks | Validation |
| Driver request, torque model and gear limits | Requested torque, calculated engine torque, speed/load limits and gearbox coordination. Increasing one limiter alone may cause throttle closure, torque monitoring intervention or misleading gearbox torque information. | Compare pedal, requested and actual torque, load, throttle angle and shift behaviour. |
| Turbo and air system | Boost request, wastegate control and pressure/temperature limits; account for actual turbocharger, charge cooling and pressure sensors. I6 electric compressor behaviour involves additional control coordination. | Compare requested versus measured manifold pressure through spool, peak and sustained load. Check intake temperature and avoid oscillation or overboost. |
| Fuel, lambda and direct injection | Requested mixture, injector and rail-pressure strategy, protection enrichment and supply capacity must match engine airflow and fuel. | Log lambda target and actual, rail pressure request/actual and misfires; use a suitable independent measurement where available. |
| Ignition and knock control | Base ignition and corrections depend on speed, load, temperature and fuel. More advance is not automatically more power. | Record actual ignition and per-cylinder corrections where available; investigate knock and fuel quality rather than masking corrections. |
| Cam timing, thermal protection and emissions | Variable valve timing, exhaust-temperature modelling, catalyst and component protection, diagnostics and hybrid/gearbox interventions all affect the usable result. | Test starts, part load, hot restarts, shifts and repeat pulls; retain functioning protection and required emissions equipment. |
Example with limited identification: a third-party Evoque 2.0 200 hp MED17.9.9 map pack lists seller-labelled torque, gear limits, VVT, injection, spark, turbo and rail groups. Its public listing masks the hardware number and does not state a complete software ID. The labels are illustrative and not factory-validated definitions; the example cannot identify another car or establish universal map addresses. Its preview also illustrates that a map definition is not a tuned file or a full ECU backup.
Upgrade options
- Software on standard hardware: develop and validate a calibration for the exact ECU, fuel grade and condition. A stock turbo engine's output may be limited by airflow, temperatures, fuelling, gearbox or factory protection. “Stage 1” is not an industry specification, and figures in advertisements are not guaranteed results.
- Charge cooling: repair leaks and restrictions first. A correctly fitted higher-capacity intercooler or heat exchanger may reduce intake temperature under repeated load, subject to airflow and pressure-drop trade-offs. Verify inlet temperature, pressure, fitment and performance on the intended vehicle rather than assuming a larger core adds a fixed amount of power.
- Turbocharger and intake: a larger or hybrid turbo needs suitable manifolds, actuator control, intake plumbing, fuel delivery and calibration. Spool, transient response and heat are as relevant as peak flow for a heavy towing or off-road vehicle. Test for leaks and map requested against actual pressure.
- Fuel and ignition support: use correct service parts and verify actual system capacity before considering upgraded pumps or injectors. Direct-injection parts need correct characterisation and the right control strategy; hardware changes alone do not assure safe mixture.
- Drivetrain and thermal package: check automatic transmission service and torque-management behaviour, transfer case, tyres, brakes and engine cooling for the duty cycle. Do not presume a published torque rating applies to every gearbox variant.
Mild hybrids and plug-in hybrids
The electric supercharger in the JLR 3.0 I6 is not a belt-pulley upgrade. Before modifying boost or torque requests, understand the interactions of the turbo, electric compressor, battery, starter-generator and transmission in the applicable vehicle. Retain diagnostics and thermal limits and check transitions between power sources.
On PHEVs, battery state of charge, temperature and power availability can change the combined output and repeatability of dyno tests. JLR's cited P400e figure is combined engine and electric drive. An engine-only calibration does not automatically deliver an equivalent increase in combined power. High-voltage work must follow the exact vehicle's isolation and competence requirements; do not disconnect orange-cable components as an improvised diagnostic step.
Road and workshop validation
After calibration, check cold start, hot restart, idle, light-load trims, tip-in and lift-off, gear changes and regenerative transitions where applicable. Record requested/actual torque, boost, lambda and fuel pressure, intake and coolant temperatures, spark correction and fault status. Compare repeated runs under controlled conditions and reassess if knock, misfire, temperature, fuel pressure or torque intervention deviates. Allow for normal correction and adaptation; do not treat a single peak as proof of sustained reliability.
Use the intended pump fuel consistently, distinguishing RON from AKI where relevant. Check insurer, emissions and approval requirements for the jurisdiction. Great Britain's MOT inspection guidance covers emissions-equipment inspection and testing. See Discovery Sport, Evoque, Velar and Defender L663 for model context.
See Land Rover engine failures and common problems for sourced timing-drive, crankshaft and Ingenium issues and service checks.