Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
ABS / DSC
Parent
Bendix ABS and traction control units
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Bendix

ABS and traction systems · Parent system

Identification and documented application

Bendix describes TABS-6 as an integrated trailer ABS ECU and modulator for air-braked trailers, semitrailers and dollies. Standard and Premium variants use different ECU connectors: the Standard uses five positions, while the Premium uses an 18-pin connector and supports additional configuration.

Identification limits

Record the vehicle VIN, market, complete vehicle-maker and supplier part numbers, equipment, software and coding. A family name alone does not prove fitment, connector compatibility or feature availability. Consult the exact vehicle service information for diagnosis, replacement and calibration.

System configurations and part numbers

Bendix stock guide BW2556a lists Standard assembly 801855 as a four-port, two-sensor/one-modulator (2S/1M) axle-only unit; Standard 801990 is listed as a dolly-axle-only unit. It lists Premium 801856 for several configurations, including 2S/1M dolly axle and 4S/3M side/axle. Match the configuration, trailer installation and current manufacturer cross-reference to the installed unit before ordering.

Source: Bendix TABS-6 suggested stock guide BW2556a.

Sources

Application-specific connector references