ABS and traction systems · ATE, Teves and Continental manufacturer directory
System identification
ATE says the integrated ABS MK II reached series production in 1984 and was used by Ford USA and Ford Europe. Continental identifies MK II as Teves' production microprocessor-controlled passenger-car ABS.
Documented examples and configuration
This is a historical Teves family name. The next MK IV is a distinct design: ITT-Teves authors describe MK IV as an add-on system with vacuum-boosted actuation, contrasting its layout with MK II.
Identification and service limits
A historical family name alone does not specify a car's hydraulic layout, controller or service procedure. Confirm the installed components and use vehicle-specific workshop information.
Record the supplier and vehicle part numbers, vehicle VIN, hardware, software and coding. Use the exact manufacturer's diagnostic, bleeding and calibration instructions for the fitted system.
Early production applications
Continental identifies the Lincoln Continental in North America and the Ford Scorpio in Europe as early MK II applications. Continental states that the Scorpio received ABS as standard equipment; confirm the individual vehicle and its build specification before assuming its components are interchangeable. The manufacturer describes the MK II as integrating brake actuation, power assistance, hydraulic control and ABS in a compact unit; traction control was added later. Continental ABS history and early applications.