Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
ABS / DSC
Parent
Mando ABS units
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Mando

Changes from revision 3 to revision 3

Removed text is struck through; added text is highlighted.

ABS and traction systems directory · Mando ABS units

MGH-20 is identified as a series-production Mando ABS in an SAE technical paper about the hydraulic braking system. The paper's family designation does not establish a particular vehicle application or part-number interchange.

Documented applications

Mando identifies MGH-20 as a series-production ABS family. One T11 application is described below; exact part-number interchange still requires vehicle-specific verification.

Identification and service

Record the full supplier and vehicle-manufacturer part numbers, vehicle VIN and fitted equipment, software version and coding where available. Use the vehicle-specific service information to confirm diagnostic capabilities, component compatibility, bleeding and any setup or calibration. A family designation alone is not a replacement-part specification.

Vehicle-specific example

The Chery Tiggo T11 service manual describes an MGH-20 supplied by Mando on the T11, with four-channel control of the individual wheel brakes. The cited manual does not establish that every Tiggo T11, market or year has this unit; identify the fitted actuator and use the correct vehicle documentation.

The manual includes a system wiring schematic in its chassis section, printed page 42, as well as diagnosis and HECU replacement and bleeding guidance. The schematic should be checked against the exact vehicle and controller before using its pin numbers. Source: T11 service manual, chassis system, ABS section (third-party hosted copy).

Sources

Mando MGH hydraulic system design paper, SAE 2003-01-0253

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 3: Mando MGH-20 ABS

ABS and traction systems directory · Mando ABS units

MGH-20 is identified as a series-production Mando ABS in an SAE technical paper about the hydraulic braking system. The paper's family designation does not establish a particular vehicle application or part-number interchange.

Documented applications

Mando identifies MGH-20 as a series-production ABS family. One T11 application is described below; exact part-number interchange still requires vehicle-specific verification.

Identification and service

Record the full supplier and vehicle-manufacturer part numbers, vehicle VIN and fitted equipment, software version and coding where available. Use the vehicle-specific service information to confirm diagnostic capabilities, component compatibility, bleeding and any setup or calibration. A family designation alone is not a replacement-part specification.

Vehicle-specific example

The Chery Tiggo T11 service manual describes an MGH-20 supplied by Mando on the T11, with four-channel control of the individual wheel brakes. The cited manual does not establish that every Tiggo T11, market or year has this unit; identify the fitted actuator and use the correct vehicle documentation.

The manual includes a system wiring schematic in its chassis section, printed page 42, as well as diagnosis and HECU replacement and bleeding guidance. The schematic should be checked against the exact vehicle and controller before using its pin numbers. Source: T11 service manual, chassis system, ABS section (third-party hosted copy).

Sources

Revision 3: Mando MGH-20 ABS

ABS and traction systems directory · Mando ABS units

MGH-20 is identified as a series-production Mando ABS in an SAE technical paper about the hydraulic braking system. The paper's family designation does not establish a particular vehicle application or part-number interchange.

Documented applications

Mando identifies MGH-20 as a series-production ABS family. One T11 application is described below; exact part-number interchange still requires vehicle-specific verification.

Identification and service

Record the full supplier and vehicle-manufacturer part numbers, vehicle VIN and fitted equipment, software version and coding where available. Use the vehicle-specific service information to confirm diagnostic capabilities, component compatibility, bleeding and any setup or calibration. A family designation alone is not a replacement-part specification.

Vehicle-specific example

The Chery Tiggo T11 service manual describes an MGH-20 supplied by Mando on the T11, with four-channel control of the individual wheel brakes. The cited manual does not establish that every Tiggo T11, market or year has this unit; identify the fitted actuator and use the correct vehicle documentation.

The manual includes a system wiring schematic in its chassis section, printed page 42, as well as diagnosis and HECU replacement and bleeding guidance. The schematic should be checked against the exact vehicle and controller before using its pin numbers. Source: T11 service manual, chassis system, ABS section (third-party hosted copy).

Sources