Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Engine ECU
Parent
RM-Primis universal standalone ECU
Applies to
RM-Primis universal standalone ECU
Tool groups
None
Manufacturers
BMW

Changes from revision 3 to revision 3

Removed text is struck through; added text is highlighted.

RM-Primis BMW M44 plug-in ECU is a vehicle-specific package based on the RM Racing Electronics RM-Primis standalone ECU. The manufacturer describes an application-specific adapter between the standalone controller and the original vehicle loom; the ECU and adapter are distinct components. Source: manufacturer product documentation.

RM Racing Electronics product image for the BMW M44 package; contents and connector details depend on the selected kit. Reproduced with permission. Manufacturer source.

Application and installation

The manufacturer lists BMW M44 four-cylinder engines; its listing names E36 318is/318ti and Z3 1.9. Check the actual engine, original ECU part number, connector, donor loom, immobiliser and transmission with the supplier; trim or model-year labels alone do not establish compatibility.

The manufacturer describes an 88-pin adapter but parts of the M44 listing are headed M43. Confirm the exact stock ECU and plug arrangement with RM before ordering or wiring.

Control and tuning

RM-Tuner provides calibration and data logging. The manufacturer describes a built-in 400 kPa MAP sensor, wideband compatibility with LSU 4.9/4.2 sensors, CAN communications, configurable safety and boost control. Electronic-throttle capability and ZF 8HP functions depend on the purchased hardware, firmware and compatible transmission. Confirm what is included before assuming an accessory or feature is present.

Connectors and wiring

The model sales page does not provide a verified complete ECU-to-adapter and vehicle-connector cavity schedule. Use the RM-Primis documentation and the exact adapter guide for the hardware supplied; do not transfer another BMW kit’s pinout based only on connector shape or model family.

References

RM-Primis BMW M44 plug-in ECU manufacturer listing; RM-Primis universal platform; RM Racing Electronics index.

Adapter auxiliary connectors — BMW M50/M4x and M6x 88-pin adapter

RM Racing’s RM-Primis booklet, PDF page 16, documents the following six-way accessory connector assignments for the adapter named above. These are the adapter’s auxiliary and LSU connectors, not the factory vehicle connector and not the 32-way board-to-ECU headers shown in the drawing. The booklet gives a generic 32-way header schedule separately on PDF page 12; see the board-header tables below. Match the actual adapter board and revision before using this schedule. The booklet says the two marked high-side outputs are converted on the adapter board to ground-switching outputs; select the corresponding high-side channel in RM-Tuner. Verify installed board and output ratings before connecting any load.

LSU 4.9 wideband adapter connector

Adapter pinSignalSensor wire colourLSU 4.9 sensor pin1H−White32VSBlack63RcalGreen54H+Grey45VS/IPYellow26IPRed1

Auxiliary connector 1

PinManufacturer function1Spare voltage input 52Spare temperature input 23Low-side general-purpose output 44MAF / analogue voltage input5Digital / trigger input 26Low-side general-purpose output 5

Auxiliary connector 2

PinManufacturer function1High-side output 4 (converted on board to low-side output)2High-side output 1 (converted on board to low-side output)3Drive-by-wire motor +4CAN high5CAN low6Drive-by-wire motor −

RM-Primis plug-in adapter board headers

The RM Racing booklet, PDF page 12, labels the RM-Primis plug-in adapter’s left and right 32-position board headers looking straight at the board. The model-specific diagrams in the booklet show the same header layout; use these tables only after matching the actual board and revision. These are board-side connector positions, not the original vehicle’s loom or ECU connector cavity numbers. Vehicle-specific adapters can route or condition signals differently; consult the model-specific auxiliary notes above and confirm the wiring before connecting devices.

Header 1 — left side of board

Board-header positionManufacturer function1Injector output 12Injector output 23Injector output 34Injector output 45Injector output 56Injector output 67Ignition output 18Ignition output 29Ignition output 310Ignition output 411Ignition output 512Ignition output 613Fuel pump output14Low-side GP 115Low-side GP 216Low-side GP 317Ground18Ignition-switch input +12 V19Permanent battery +12 V20LSU IP21LSU RCAL22LSU VS/IP23LSU VS24LSU H+25LSU H−26Tachometer output27High-side GP 428High-side GP 329High-side GP 2 push-pull30High-side GP 1 push-pull31Low-side GP 532Low-side GP 4

Header 2 — right side of board

Board-header positionManufacturer function1Throttle position sensor input2Coolant temperature sensor input3Intake air temperature sensor input4Digital / trigger input 1 (pull-up selectable)5Digital / trigger input 2 (pull-up selectable)6Digital / trigger Hall input (no pull-up)7MAF / analogue voltage input8Spare voltage input 19Spare voltage input 210Spare voltage input 311Spare voltage input 412Spare voltage input 5 (pedal 2 when DBW)13Spare temperature input 114Spare temperature input 2 (pedal 1 when DBW)15DBW TPS input 2165 V output for sensors17DBW motor +18DBW motor −19Ground20Ground21Ground225 V output for sensors23CAN low24CAN high25Knock sensor 2 −26Knock sensor 2 + signal27Knock sensor 1 −28Knock sensor 1 + signal29Variable-reluctance sensor 2 −30Variable-reluctance sensor 2 +31Variable-reluctance sensor 1 − (adjustable threshold)32Variable-reluctance sensor 1 + (adjustable threshold)

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 3: RM-Primis BMW M44 plug-in ECU

RM-Primis BMW M44 plug-in ECU is a vehicle-specific package based on the RM Racing Electronics RM-Primis standalone ECU. The manufacturer describes an application-specific adapter between the standalone controller and the original vehicle loom; the ECU and adapter are distinct components. Source: manufacturer product documentation.

RM-Primis BMW M44 kit
RM Racing Electronics product image for the BMW M44 package; contents and connector details depend on the selected kit. Reproduced with permission. Manufacturer source.

Application and installation

The manufacturer lists BMW M44 four-cylinder engines; its listing names E36 318is/318ti and Z3 1.9. Check the actual engine, original ECU part number, connector, donor loom, immobiliser and transmission with the supplier; trim or model-year labels alone do not establish compatibility.

The manufacturer describes an 88-pin adapter but parts of the M44 listing are headed M43. Confirm the exact stock ECU and plug arrangement with RM before ordering or wiring.

Control and tuning

RM-Tuner provides calibration and data logging. The manufacturer describes a built-in 400 kPa MAP sensor, wideband compatibility with LSU 4.9/4.2 sensors, CAN communications, configurable safety and boost control. Electronic-throttle capability and ZF 8HP functions depend on the purchased hardware, firmware and compatible transmission. Confirm what is included before assuming an accessory or feature is present.

Connectors and wiring

The model sales page does not provide a verified complete ECU-to-adapter and vehicle-connector cavity schedule. Use the RM-Primis documentation and the exact adapter guide for the hardware supplied; do not transfer another BMW kit’s pinout based only on connector shape or model family.

References

RM-Primis BMW M44 plug-in ECU manufacturer listing; RM-Primis universal platform; RM Racing Electronics index.

Adapter auxiliary connectors — BMW M50/M4x and M6x 88-pin adapter

RM Racing’s RM-Primis booklet, PDF page 16, documents the following six-way accessory connector assignments for the adapter named above. These are the adapter’s auxiliary and LSU connectors, not the factory vehicle connector and not the 32-way board-to-ECU headers shown in the drawing. The booklet gives a generic 32-way header schedule separately on PDF page 12; see the board-header tables below. Match the actual adapter board and revision before using this schedule. The booklet says the two marked high-side outputs are converted on the adapter board to ground-switching outputs; select the corresponding high-side channel in RM-Tuner. Verify installed board and output ratings before connecting any load.

LSU 4.9 wideband adapter connector

Adapter pinSignalSensor wire colourLSU 4.9 sensor pin
1H−White3
2VSBlack6
3RcalGreen5
4H+Grey4
5VS/IPYellow2
6IPRed1

Auxiliary connector 1

PinManufacturer function
1Spare voltage input 5
2Spare temperature input 2
3Low-side general-purpose output 4
4MAF / analogue voltage input
5Digital / trigger input 2
6Low-side general-purpose output 5

Auxiliary connector 2

PinManufacturer function
1High-side output 4 (converted on board to low-side output)
2High-side output 1 (converted on board to low-side output)
3Drive-by-wire motor +
4CAN high
5CAN low
6Drive-by-wire motor −

RM-Primis plug-in adapter board headers

The RM Racing booklet, PDF page 12, labels the RM-Primis plug-in adapter’s left and right 32-position board headers looking straight at the board. The model-specific diagrams in the booklet show the same header layout; use these tables only after matching the actual board and revision. These are board-side connector positions, not the original vehicle’s loom or ECU connector cavity numbers. Vehicle-specific adapters can route or condition signals differently; consult the model-specific auxiliary notes above and confirm the wiring before connecting devices.

Header 1 — left side of board

Board-header positionManufacturer function
1Injector output 1
2Injector output 2
3Injector output 3
4Injector output 4
5Injector output 5
6Injector output 6
7Ignition output 1
8Ignition output 2
9Ignition output 3
10Ignition output 4
11Ignition output 5
12Ignition output 6
13Fuel pump output
14Low-side GP 1
15Low-side GP 2
16Low-side GP 3
17Ground
18Ignition-switch input +12 V
19Permanent battery +12 V
20LSU IP
21LSU RCAL
22LSU VS/IP
23LSU VS
24LSU H+
25LSU H−
26Tachometer output
27High-side GP 4
28High-side GP 3
29High-side GP 2 push-pull
30High-side GP 1 push-pull
31Low-side GP 5
32Low-side GP 4

Header 2 — right side of board

Board-header positionManufacturer function
1Throttle position sensor input
2Coolant temperature sensor input
3Intake air temperature sensor input
4Digital / trigger input 1 (pull-up selectable)
5Digital / trigger input 2 (pull-up selectable)
6Digital / trigger Hall input (no pull-up)
7MAF / analogue voltage input
8Spare voltage input 1
9Spare voltage input 2
10Spare voltage input 3
11Spare voltage input 4
12Spare voltage input 5 (pedal 2 when DBW)
13Spare temperature input 1
14Spare temperature input 2 (pedal 1 when DBW)
15DBW TPS input 2
165 V output for sensors
17DBW motor +
18DBW motor −
19Ground
20Ground
21Ground
225 V output for sensors
23CAN low
24CAN high
25Knock sensor 2 −
26Knock sensor 2 + signal
27Knock sensor 1 −
28Knock sensor 1 + signal
29Variable-reluctance sensor 2 −
30Variable-reluctance sensor 2 +
31Variable-reluctance sensor 1 − (adjustable threshold)
32Variable-reluctance sensor 1 + (adjustable threshold)
Revision 3: RM-Primis BMW M44 plug-in ECU

RM-Primis BMW M44 plug-in ECU is a vehicle-specific package based on the RM Racing Electronics RM-Primis standalone ECU. The manufacturer describes an application-specific adapter between the standalone controller and the original vehicle loom; the ECU and adapter are distinct components. Source: manufacturer product documentation.

RM-Primis BMW M44 kit
RM Racing Electronics product image for the BMW M44 package; contents and connector details depend on the selected kit. Reproduced with permission. Manufacturer source.

Application and installation

The manufacturer lists BMW M44 four-cylinder engines; its listing names E36 318is/318ti and Z3 1.9. Check the actual engine, original ECU part number, connector, donor loom, immobiliser and transmission with the supplier; trim or model-year labels alone do not establish compatibility.

The manufacturer describes an 88-pin adapter but parts of the M44 listing are headed M43. Confirm the exact stock ECU and plug arrangement with RM before ordering or wiring.

Control and tuning

RM-Tuner provides calibration and data logging. The manufacturer describes a built-in 400 kPa MAP sensor, wideband compatibility with LSU 4.9/4.2 sensors, CAN communications, configurable safety and boost control. Electronic-throttle capability and ZF 8HP functions depend on the purchased hardware, firmware and compatible transmission. Confirm what is included before assuming an accessory or feature is present.

Connectors and wiring

The model sales page does not provide a verified complete ECU-to-adapter and vehicle-connector cavity schedule. Use the RM-Primis documentation and the exact adapter guide for the hardware supplied; do not transfer another BMW kit’s pinout based only on connector shape or model family.

References

RM-Primis BMW M44 plug-in ECU manufacturer listing; RM-Primis universal platform; RM Racing Electronics index.

Adapter auxiliary connectors — BMW M50/M4x and M6x 88-pin adapter

RM Racing’s RM-Primis booklet, PDF page 16, documents the following six-way accessory connector assignments for the adapter named above. These are the adapter’s auxiliary and LSU connectors, not the factory vehicle connector and not the 32-way board-to-ECU headers shown in the drawing. The booklet gives a generic 32-way header schedule separately on PDF page 12; see the board-header tables below. Match the actual adapter board and revision before using this schedule. The booklet says the two marked high-side outputs are converted on the adapter board to ground-switching outputs; select the corresponding high-side channel in RM-Tuner. Verify installed board and output ratings before connecting any load.

LSU 4.9 wideband adapter connector

Adapter pinSignalSensor wire colourLSU 4.9 sensor pin
1H−White3
2VSBlack6
3RcalGreen5
4H+Grey4
5VS/IPYellow2
6IPRed1

Auxiliary connector 1

PinManufacturer function
1Spare voltage input 5
2Spare temperature input 2
3Low-side general-purpose output 4
4MAF / analogue voltage input
5Digital / trigger input 2
6Low-side general-purpose output 5

Auxiliary connector 2

PinManufacturer function
1High-side output 4 (converted on board to low-side output)
2High-side output 1 (converted on board to low-side output)
3Drive-by-wire motor +
4CAN high
5CAN low
6Drive-by-wire motor −

RM-Primis plug-in adapter board headers

The RM Racing booklet, PDF page 12, labels the RM-Primis plug-in adapter’s left and right 32-position board headers looking straight at the board. The model-specific diagrams in the booklet show the same header layout; use these tables only after matching the actual board and revision. These are board-side connector positions, not the original vehicle’s loom or ECU connector cavity numbers. Vehicle-specific adapters can route or condition signals differently; consult the model-specific auxiliary notes above and confirm the wiring before connecting devices.

Header 1 — left side of board

Board-header positionManufacturer function
1Injector output 1
2Injector output 2
3Injector output 3
4Injector output 4
5Injector output 5
6Injector output 6
7Ignition output 1
8Ignition output 2
9Ignition output 3
10Ignition output 4
11Ignition output 5
12Ignition output 6
13Fuel pump output
14Low-side GP 1
15Low-side GP 2
16Low-side GP 3
17Ground
18Ignition-switch input +12 V
19Permanent battery +12 V
20LSU IP
21LSU RCAL
22LSU VS/IP
23LSU VS
24LSU H+
25LSU H−
26Tachometer output
27High-side GP 4
28High-side GP 3
29High-side GP 2 push-pull
30High-side GP 1 push-pull
31Low-side GP 5
32Low-side GP 4

Header 2 — right side of board

Board-header positionManufacturer function
1Throttle position sensor input
2Coolant temperature sensor input
3Intake air temperature sensor input
4Digital / trigger input 1 (pull-up selectable)
5Digital / trigger input 2 (pull-up selectable)
6Digital / trigger Hall input (no pull-up)
7MAF / analogue voltage input
8Spare voltage input 1
9Spare voltage input 2
10Spare voltage input 3
11Spare voltage input 4
12Spare voltage input 5 (pedal 2 when DBW)
13Spare temperature input 1
14Spare temperature input 2 (pedal 1 when DBW)
15DBW TPS input 2
165 V output for sensors
17DBW motor +
18DBW motor −
19Ground
20Ground
21Ground
225 V output for sensors
23CAN low
24CAN high
25Knock sensor 2 −
26Knock sensor 2 + signal
27Knock sensor 1 −
28Knock sensor 1 + signal
29Variable-reluctance sensor 2 −
30Variable-reluctance sensor 2 +
31Variable-reluctance sensor 1 − (adjustable threshold)
32Variable-reluctance sensor 1 + (adjustable threshold)