Removed text is struck through; added text is highlighted.
FiTech 30055 Go E85 2×4 Power Adder 1200HP EFI System, Brilliant is a self-learning dual-quad throttle-body fuel-injection system. FiTech describes this as an E85-oriented, dual-quad power-adder system with eight 130 lb/hr injectors. It uses two compatible four-barrel flanges; confirm the exact kit and manifold before ordering.
FiTech’s 30055 product-gallery photograph. Source: FiTech manufacturer listing; reproduced with permission.
Identification and fitment
Use the part number to select the correct throttle body, harness, fuel-delivery package and installation instructions. The manifold needs two compatible four-barrel mounting locations. The product listing identifies the pump as separate from this listed base kit; master kits can differ. FiTech 30055 specifications.
ItemManufacturer listingFiTech model30055Mounting flangeDual 4-barrel square boreECU includedYesThrottle-body finishBrilliantFuel pump included in listed base kitNoTiming control, manufacturer listingYesPower-adder compatible, manufacturer listingYes
Source discrepancy: The product description rates the system at up to 1,600 hp on petrol and 1,200 hp on E85, while its specification table reverses those fuel labels. Confirm the rating and actual fuel system requirements with FiTech.
Control and installation
FiTech describes self-learning fuel adjustment after initial setup, using an oxygen-sensor input. A correctly specified high-pressure EFI fuel system, sensors and ignition reference are required; verify the fuel-system and distributor configuration against the model manual. A carburettor-replacement throttle body does not automatically provide every ignition or transmission-control function.
Wiring documentation
Use the FiTech installation documentation for the exact system and revision. A complete numbered ECU connector schedule has not yet been verified for this page; do not substitute the wiring of a visually similar kit.
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 2: FiTech 30055 Go E85 2×4 Power Adder 1200HP EFI System, Brilliant
FiTech 30055 Go E85 2×4 Power Adder 1200HP EFI System, Brilliant is a self-learning dual-quad throttle-body fuel-injection system. FiTech describes this as an E85-oriented, dual-quad power-adder system with eight 130 lb/hr injectors. It uses two compatible four-barrel flanges; confirm the exact kit and manifold before ordering.
Use the part number to select the correct throttle body, harness, fuel-delivery package and installation instructions. The manifold needs two compatible four-barrel mounting locations. The product listing identifies the pump as separate from this listed base kit; master kits can differ. FiTech 30055 specifications.
Item
Manufacturer listing
FiTech model
30055
Mounting flange
Dual 4-barrel square bore
ECU included
Yes
Throttle-body finish
Brilliant
Fuel pump included in listed base kit
No
Timing control, manufacturer listing
Yes
Power-adder compatible, manufacturer listing
Yes
Source discrepancy: The product description rates the system at up to 1,600 hp on petrol and 1,200 hp on E85, while its specification table reverses those fuel labels. Confirm the rating and actual fuel system requirements with FiTech.
Control and installation
FiTech describes self-learning fuel adjustment after initial setup, using an oxygen-sensor input. A correctly specified high-pressure EFI fuel system, sensors and ignition reference are required; verify the fuel-system and distributor configuration against the model manual. A carburettor-replacement throttle body does not automatically provide every ignition or transmission-control function.
Wiring documentation
Use the FiTech installation documentation for the exact system and revision. A complete numbered ECU connector schedule has not yet been verified for this page; do not substitute the wiring of a visually similar kit.
Revision 2: FiTech 30055 Go E85 2×4 Power Adder 1200HP EFI System, Brilliant
FiTech 30055 Go E85 2×4 Power Adder 1200HP EFI System, Brilliant is a self-learning dual-quad throttle-body fuel-injection system. FiTech describes this as an E85-oriented, dual-quad power-adder system with eight 130 lb/hr injectors. It uses two compatible four-barrel flanges; confirm the exact kit and manifold before ordering.
Use the part number to select the correct throttle body, harness, fuel-delivery package and installation instructions. The manifold needs two compatible four-barrel mounting locations. The product listing identifies the pump as separate from this listed base kit; master kits can differ. FiTech 30055 specifications.
Item
Manufacturer listing
FiTech model
30055
Mounting flange
Dual 4-barrel square bore
ECU included
Yes
Throttle-body finish
Brilliant
Fuel pump included in listed base kit
No
Timing control, manufacturer listing
Yes
Power-adder compatible, manufacturer listing
Yes
Source discrepancy: The product description rates the system at up to 1,600 hp on petrol and 1,200 hp on E85, while its specification table reverses those fuel labels. Confirm the rating and actual fuel system requirements with FiTech.
Control and installation
FiTech describes self-learning fuel adjustment after initial setup, using an oxygen-sensor input. A correctly specified high-pressure EFI fuel system, sensors and ignition reference are required; verify the fuel-system and distributor configuration against the model manual. A carburettor-replacement throttle body does not automatically provide every ignition or transmission-control function.
Wiring documentation
Use the FiTech installation documentation for the exact system and revision. A complete numbered ECU connector schedule has not yet been verified for this page; do not substitute the wiring of a visually similar kit.