Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Engine ECU
Parent
FiTech standalone and throttle-body EFI systems
Applies to
FiTech standalone and throttle-body EFI systems
Tool groups
None
Manufacturers
None

Changes from revision 2 to revision 2

Removed text is struck through; added text is highlighted.

FiTech 30054 Go E85 2×4 Power Adder 1200HP EFI System, Black is a self-learning dual-quad throttle-body fuel-injection system. FiTech describes this as an E85-oriented, dual-quad power-adder system with eight 130 lb/hr injectors. It uses two compatible four-barrel flanges; confirm the exact kit and manifold before ordering.

FiTech’s 30054 product-gallery photograph. Source: FiTech manufacturer listing; reproduced with permission.

Identification and fitment

Use the part number to select the correct throttle body, harness, fuel-delivery package and installation instructions. The manifold needs two compatible four-barrel mounting locations. The product listing identifies the pump as separate from this listed base kit; master kits can differ. FiTech 30054 specifications.

ItemManufacturer listingFiTech model30054Mounting flangeDual 4-barrel square boreECU includedYesThrottle-body finishSatin blackFuel pump included in listed base kitNoTiming control, manufacturer listingYesPower-adder compatible, manufacturer listingYes

Source discrepancy: The product description rates the system at up to 1,600 hp on petrol and 1,200 hp on E85, while its specification table reverses those fuel labels. Confirm the rating and actual fuel system requirements with FiTech.

Control and installation

FiTech describes self-learning fuel adjustment after initial setup, using an oxygen-sensor input. A correctly specified high-pressure EFI fuel system, sensors and ignition reference are required; verify the fuel-system and distributor configuration against the model manual. A carburettor-replacement throttle body does not automatically provide every ignition or transmission-control function.

Wiring documentation

Use the FiTech installation documentation for the exact system and revision. A complete numbered ECU connector schedule has not yet been verified for this page; do not substitute the wiring of a visually similar kit.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 2: FiTech 30054 Go E85 2×4 Power Adder 1200HP EFI System, Black

FiTech 30054 Go E85 2×4 Power Adder 1200HP EFI System, Black is a self-learning dual-quad throttle-body fuel-injection system. FiTech describes this as an E85-oriented, dual-quad power-adder system with eight 130 lb/hr injectors. It uses two compatible four-barrel flanges; confirm the exact kit and manifold before ordering.

FiTech 30054 throttle-body EFI system
FiTech’s 30054 product-gallery photograph. Source: FiTech manufacturer listing; reproduced with permission.

Identification and fitment

Use the part number to select the correct throttle body, harness, fuel-delivery package and installation instructions. The manifold needs two compatible four-barrel mounting locations. The product listing identifies the pump as separate from this listed base kit; master kits can differ. FiTech 30054 specifications.

ItemManufacturer listing
FiTech model30054
Mounting flangeDual 4-barrel square bore
ECU includedYes
Throttle-body finishSatin black
Fuel pump included in listed base kitNo
Timing control, manufacturer listingYes
Power-adder compatible, manufacturer listingYes

Source discrepancy: The product description rates the system at up to 1,600 hp on petrol and 1,200 hp on E85, while its specification table reverses those fuel labels. Confirm the rating and actual fuel system requirements with FiTech.

Control and installation

FiTech describes self-learning fuel adjustment after initial setup, using an oxygen-sensor input. A correctly specified high-pressure EFI fuel system, sensors and ignition reference are required; verify the fuel-system and distributor configuration against the model manual. A carburettor-replacement throttle body does not automatically provide every ignition or transmission-control function.

Wiring documentation

Use the FiTech installation documentation for the exact system and revision. A complete numbered ECU connector schedule has not yet been verified for this page; do not substitute the wiring of a visually similar kit.

Revision 2: FiTech 30054 Go E85 2×4 Power Adder 1200HP EFI System, Black

FiTech 30054 Go E85 2×4 Power Adder 1200HP EFI System, Black is a self-learning dual-quad throttle-body fuel-injection system. FiTech describes this as an E85-oriented, dual-quad power-adder system with eight 130 lb/hr injectors. It uses two compatible four-barrel flanges; confirm the exact kit and manifold before ordering.

FiTech 30054 throttle-body EFI system
FiTech’s 30054 product-gallery photograph. Source: FiTech manufacturer listing; reproduced with permission.

Identification and fitment

Use the part number to select the correct throttle body, harness, fuel-delivery package and installation instructions. The manifold needs two compatible four-barrel mounting locations. The product listing identifies the pump as separate from this listed base kit; master kits can differ. FiTech 30054 specifications.

ItemManufacturer listing
FiTech model30054
Mounting flangeDual 4-barrel square bore
ECU includedYes
Throttle-body finishSatin black
Fuel pump included in listed base kitNo
Timing control, manufacturer listingYes
Power-adder compatible, manufacturer listingYes

Source discrepancy: The product description rates the system at up to 1,600 hp on petrol and 1,200 hp on E85, while its specification table reverses those fuel labels. Confirm the rating and actual fuel system requirements with FiTech.

Control and installation

FiTech describes self-learning fuel adjustment after initial setup, using an oxygen-sensor input. A correctly specified high-pressure EFI fuel system, sensors and ignition reference are required; verify the fuel-system and distributor configuration against the model manual. A carburettor-replacement throttle body does not automatically provide every ignition or transmission-control function.

Wiring documentation

Use the FiTech installation documentation for the exact system and revision. A complete numbered ECU connector schedule has not yet been verified for this page; do not substitute the wiring of a visually similar kit.