Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Engine ECU
Parent
FiTech standalone and throttle-body EFI systems
Applies to
FiTech standalone and throttle-body EFI systems
Tool groups
None
Manufacturers
None

FiTech 30017 Go E85 1200HP Power Adder EFI, Black is a self-learning carburettor-replacement throttle-body fuel-injection system. FiTech describes this as an E85-oriented Go EFI 8 Power Adder system with eight 130 lb/hr injectors, ECU and self-learning. Confirm fuel, power and exact kit specification with FiTech.

FiTech 30017 throttle-body EFI system
FiTech’s 30017 product-gallery photograph. Source: FiTech manufacturer listing; reproduced with permission.

Identification and fitment

Use the part number to select the correct throttle body, harness, fuel-delivery package and installation instructions. The flange is specified as a four-barrel square bore; some spread-bore manifolds need an adaptor. The product listing identifies the pump as separate from this listed base kit; master kits can differ. FiTech 30017 specifications.

ItemManufacturer listing
FiTech model30017
Manufacturer maximum power1200 HP (E85), 1600 HP (Gas)
Mounting flange4-barrel square bore
ECU includedYes
Throttle-body finishBlack
Fuel pump included in listed base kitNo
Timing control, manufacturer listingYes
Power-adder compatible, manufacturer listingYes

Control and installation

FiTech describes self-learning fuel adjustment after initial setup, using an oxygen-sensor input. A correctly specified high-pressure EFI fuel system, sensors and ignition reference are required; verify the fuel-system and distributor configuration against the model manual. A carburettor-replacement throttle body does not automatically provide every ignition or transmission-control function.

Wiring documentation

Use the FiTech installation documentation for the exact system and revision. A complete numbered ECU connector schedule has not yet been verified for this page; do not substitute the wiring of a visually similar kit.