Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Engine ECU
Parent
ThunderMax standalone motorcycle ECUs
Applies to
ThunderMax standalone motorcycle ECUs
Tool groups
None
Manufacturers
None

ThunderMax 309-313 is a vehicle-specific standalone replacement engine-management kit for fuel-injected Harley-Davidson motorcycles. It replaces the original ECM and connects to the specified vehicle harness; it is not simply a piggyback fuel controller. ThunderMax model documentation.

Manufacturer illustration of the ThunderMax 309-313 kit
Manufacturer illustration of the ThunderMax 309-313 kit. Image: ThunderMax manufacturer product listing, reproduced with permission.

Application and identification

1999–2001 Harley-Davidson Touring models equipped with the Magneti Marelli fuel-injection system. Manufacturer source.

Check the part number, model year, throttle arrangement, vehicle equipment and the manufacturer’s current installation guide. Kit contents and engine compatibility must not be inferred from the common ThunderMax brand or another part number.

Control and installation

ThunderMax describes its replacement systems as using wideband oxygen-sensor feedback and AutoTune. Sensors, adapters, software, basemap and calibration depend on the kit and vehicle. Manufacturer system overview; installation and support documents.

Connector information

This application uses the relevant factory-style vehicle connection and the kit’s associated sensor harness. A complete pin-by-pin schedule for this exact part number has not been verified here; consult the matching installation instructions and identify the connector and harness before wiring. Do not transfer a pinout from another Harley-Davidson model or ThunderMax kit.

Documented installation connections — partial

The ThunderMax 309-312 / 309-313 installation guide, version 2021.6.19 as printed in the PDF, page 3, identifies these positions in the ECM harness connector for the specified original Marelli Touring applications. This is a partial installation reference, not a complete connector schedule. Mechanical-speedometer models have separate instructions; consult the source and identify the exact harness before wiring.

ECM harness cavityMotorcycle yearDocumented connection
81999White lead from supplied in-line vehicle-speed-sensor harness; mechanical-speedometer instructions use the separate green/white lead.
82000–2001Green/white speed-signal lead; other end connects to the main harness connector position 5.

The same guide explains that the ThunderMax replacement uses the crankshaft sensor signal rather than the factory Marelli system’s cam and crank signals and specifies a supplied modified ECM power relay. Follow the complete model-specific procedure and check the source revision.