Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
ABS / DSC
Parent
RHT Motorsport ABS systems
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
RHT Motorsport

Changes from revision 3 to revision 4

Removed text is struck through; added text is highlighted.

RHT supplies vehicle-specific ABS solutions based on MK60, MK60E1 and MK60E5 controller families. Its FAQ distinguishes street-based MK60 units retaining original E46 M3 software from its Race ABS configuration using Continental Motorsport software. The configuration should be confirmed for the specific unit. RHT systems; RHT ABS FAQ.

Applications and integration

RHT describes custom installations across many chassis using compatible wheel-speed sensors. Its FAQ identifies E46 M3 as a typical donor for its street-based configuration, not as a claim that any particular retrofit chassis is a factory motorsport fitment. Supplier-customized sensor mounting and calibration may be required.

The FAQ describes separate wheel-speed outputs for ECU traction-control integration and additional CAN output for the Race ABS configuration; the engine ECU still performs any traction-control intervention. Availability and signals depend on the actual controller and wiring. RHT integration FAQ.

Connector information

RHT’s public installation note documents selected wheel-speed positions for its optional interface; it does not provide a complete kit-specific pinout. MK60, MK60E1 and MK60E5 connections must be identified separately against the supplied controller and harness.

Documented retrofit example

Vorshlag Motorsports documents replacing the inoperative brakes controller in its 2004 Cadillac CTS-V race-car project with a BMW E46 M3 MK60 and a custom Racing Harness Technologies loom supplied by Douglas Wardell. This is an aftermarket race build, not a Cadillac factory fitment; the report does not establish whether the controller used racing or road calibration. Vorshlag project record.

Wheel-speed and vehicle references

The RHT digital wheel-speed module can interface ABS speed data to a compatible ECU or logger. RHT’s MK60E1 instructions also describe a 987.1 Porsche Cayman brake-switch retrofit example; confirm actual chassis, switch and harness with the supplier. RHT MK60E1 installation note.

RHT installation-note differencesRHT publishes separate installation notes for its MK60 and MK60E1 integrations. Its MK60 notes list three individually fused power inputs; the MK60E1 notes list four. The MK60 notes also list two pressure sensors in addition to the compatible wheel-speed and DSC/yaw sensors. For diagnosis through the supplied OBD port, RHT suggests a 2003–2006 BMW E46 M3 scan-tool selection for its documented MK60 and a 2010 BMW 1 Series selection for its documented MK60E1. These are diagnostic menu choices for the described installations, not claims that a retrofit vehicle is either BMW.RHT warns that the described wheel-speed sensors are polarity sensitive. Confirm the unit, harness, sensor polarity, individual fuse ratings and brake-switch arrangement against the correct supplier note; do not transfer instructions between MK60, MK60E1 and MK60E5 solely by family name. Sources: RHT MK60 installation notes; RHT MK60E1 installation notes.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 3: RHT Motorsport MK60 family race ABS

RHT supplies vehicle-specific ABS solutions based on MK60, MK60E1 and MK60E5 controller families. Its FAQ distinguishes street-based MK60 units retaining original E46 M3 software from its Race ABS configuration using Continental Motorsport software. The configuration should be confirmed for the specific unit. RHT systems; RHT ABS FAQ.

Applications and integration

RHT describes custom installations across many chassis using compatible wheel-speed sensors. Its FAQ identifies E46 M3 as a typical donor for its street-based configuration, not as a claim that any particular retrofit chassis is a factory motorsport fitment. Supplier-customized sensor mounting and calibration may be required.

The FAQ describes separate wheel-speed outputs for ECU traction-control integration and additional CAN output for the Race ABS configuration; the engine ECU still performs any traction-control intervention. Availability and signals depend on the actual controller and wiring. RHT integration FAQ.

Connector information

RHT’s public installation note documents selected wheel-speed positions for its optional interface; it does not provide a complete kit-specific pinout. MK60, MK60E1 and MK60E5 connections must be identified separately against the supplied controller and harness.

Documented retrofit example

Vorshlag Motorsports documents replacing the inoperative brakes controller in its 2004 Cadillac CTS-V race-car project with a BMW E46 M3 MK60 and a custom Racing Harness Technologies loom supplied by Douglas Wardell. This is an aftermarket race build, not a Cadillac factory fitment; the report does not establish whether the controller used racing or road calibration. Vorshlag project record.

Wheel-speed and vehicle references

The RHT digital wheel-speed module can interface ABS speed data to a compatible ECU or logger. RHT’s MK60E1 instructions also describe a 987.1 Porsche Cayman brake-switch retrofit example; confirm actual chassis, switch and harness with the supplier. RHT MK60E1 installation note.

Revision 4: RHT Motorsport MK60 family race ABS

RHT supplies vehicle-specific ABS solutions based on MK60, MK60E1 and MK60E5 controller families. Its FAQ distinguishes street-based MK60 units retaining original E46 M3 software from its Race ABS configuration using Continental Motorsport software. The configuration should be confirmed for the specific unit. RHT systems; RHT ABS FAQ.

Applications and integration

RHT describes custom installations across many chassis using compatible wheel-speed sensors. Its FAQ identifies E46 M3 as a typical donor for its street-based configuration, not as a claim that any particular retrofit chassis is a factory motorsport fitment. Supplier-customized sensor mounting and calibration may be required.

The FAQ describes separate wheel-speed outputs for ECU traction-control integration and additional CAN output for the Race ABS configuration; the engine ECU still performs any traction-control intervention. Availability and signals depend on the actual controller and wiring. RHT integration FAQ.

Connector information

RHT’s public installation note documents selected wheel-speed positions for its optional interface; it does not provide a complete kit-specific pinout. MK60, MK60E1 and MK60E5 connections must be identified separately against the supplied controller and harness.

Documented retrofit example

Vorshlag Motorsports documents replacing the inoperative brakes controller in its 2004 Cadillac CTS-V race-car project with a BMW E46 M3 MK60 and a custom Racing Harness Technologies loom supplied by Douglas Wardell. This is an aftermarket race build, not a Cadillac factory fitment; the report does not establish whether the controller used racing or road calibration. Vorshlag project record.

Wheel-speed and vehicle references

The RHT digital wheel-speed module can interface ABS speed data to a compatible ECU or logger. RHT’s MK60E1 instructions also describe a 987.1 Porsche Cayman brake-switch retrofit example; confirm actual chassis, switch and harness with the supplier. RHT MK60E1 installation note.

RHT installation-note differences

RHT publishes separate installation notes for its MK60 and MK60E1 integrations. Its MK60 notes list three individually fused power inputs; the MK60E1 notes list four. The MK60 notes also list two pressure sensors in addition to the compatible wheel-speed and DSC/yaw sensors. For diagnosis through the supplied OBD port, RHT suggests a 2003–2006 BMW E46 M3 scan-tool selection for its documented MK60 and a 2010 BMW 1 Series selection for its documented MK60E1. These are diagnostic menu choices for the described installations, not claims that a retrofit vehicle is either BMW.

RHT warns that the described wheel-speed sensors are polarity sensitive. Confirm the unit, harness, sensor polarity, individual fuse ratings and brake-switch arrangement against the correct supplier note; do not transfer instructions between MK60, MK60E1 and MK60E5 solely by family name. Sources: RHT MK60 installation notes; RHT MK60E1 installation notes.