Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Engine ECU
Parent
Edelbrock Pro-Flo 4 Plus EFI
Applies to
Edelbrock Pro-Flo 4 Plus EFI
Tool groups
None
Manufacturers
None

Edelbrock Pro-Flo 4 Plus 36160 2015–2017 Ford Coyote: Pro-Flo 4+ 36160 is the manufacturer’s engine-management kit listed for 2015–2017 Ford Coyote. It uses a separate, weather-resistant ECU, a matching terminated harness and an application-specific base calibration; it controls an appropriate modern EFI engine and does not by itself replace a carburettor. Verify the engine generation, reluctor or trigger, sensors, throttle body, pedal, variable-cam and auxiliary harnesses against the exact kit. Edelbrock’s selection guide identifies this engine and kit number.

Edelbrock Pro-Flo 4 Plus 36160 2015–2017 Ford Coyote manufacturer illustration
Edelbrock installation manual cover for the Coyote family; applications and harnesses differ. Edelbrock source; reproduced with permission.

Selection and system layout

Identify the exact ECU, engine and kit part number, intake and throttle, sensor and ignition arrangement. The phone or tablet app is the calibration and monitoring interface, not the ECU. Fuel delivery, return plumbing and auxiliary components depend on the package. Consult the manufacturer documentation for the specific configuration.

Wiring documentation

Use the model-specific Edelbrock source for hardware and wiring. A complete numbered ECU connector table has not yet been verified for this page; do not substitute the assignment of another Pro-Flo or E-Street system.