Page organisation in this revision
- Page type
- Technical article
- Subject
- Tuning
- Parent
- Section level
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- Land Rover
Changes from revision 1 to revision 1
Removed text is struck through; added text is highlighted.
Turner Engineering (established 1979, UK) is a specialist remanufacturer of classic Land Rover engines and worldwide supplier of OEM and uprated Land Rover engine parts spanning Series II/IIA/III, Defender, Discovery and Range Rover powertrains. Turner Engineering.
Services and product lines
Remanufactured stripped and short engines: Long-block (stripped) and short-engine assemblies for 2.25-litre petrol/diesel, 2.5-litre petrol/NA diesel/Diesel Turbo, 200Tdi, 300Tdi, Td5 and Rover V8 (3.5, 3.9, 4.0, 4.2 and 4.6-litre) Land Rovers. Turner Engineering stripped engines.
Uprated AMC Td5 and 300Tdi cylinder heads: Supplies Spanish-cast AMC cylinder heads for Td5 (distinguishing early two-internal-gallery LDF500160 heads up to VIN 1A622423 from late LDF500170 heads, featuring thicker injector-socket walls to resist cracking) and 300Tdi (LDF500180) engines. Turner Engineering Td5 parts.
Comprehensive engine spares catalogue: Pistons (including Kolbenschmidt OEM), bearings, gasket sets, timing components, water pumps and rebuild kits covering Series fours through modern Ford 2.2/2.4 TDCi, 2.7/3.0 TDV6, 3.6/4.4 TDV8, 4.2/5.0 AJ-V8 and 2.0 Ingenium diesel parts. Turner Engineering catalogue.
Workshop technical notes
Turner Engineering advises that its stripped Td5 long-block assemblies exclude injectors, harness, rocker shaft and fuel pressure regulator, and specifically warns against fitting heavy-duty clutches or solid flywheels on standard Td5 engine builds. Turner Engineering stripped engines.
Sources and related pages
Turner Engineering official website and Stripped engines catalogue.
Land Rover aftermarket tuners and specialists.
Series I–III, Classic Defender and Land Rover Td5 tuning guide.
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: Turner Engineering: Land Rover engine remanufacturers
Turner Engineering (established 1979, UK) is a specialist remanufacturer of classic Land Rover engines and worldwide supplier of OEM and uprated Land Rover engine parts spanning Series II/IIA/III, Defender, Discovery and Range Rover powertrains. Turner Engineering.
Services and product lines
- Remanufactured stripped and short engines: Long-block (stripped) and short-engine assemblies for 2.25-litre petrol/diesel, 2.5-litre petrol/NA diesel/Diesel Turbo, 200Tdi, 300Tdi, Td5 and Rover V8 (3.5, 3.9, 4.0, 4.2 and 4.6-litre) Land Rovers. Turner Engineering stripped engines.
- Uprated AMC Td5 and 300Tdi cylinder heads: Supplies Spanish-cast AMC cylinder heads for Td5 (distinguishing early two-internal-gallery
LDF500160 heads up to VIN 1A622423 from late LDF500170 heads, featuring thicker injector-socket walls to resist cracking) and 300Tdi (LDF500180) engines. Turner Engineering Td5 parts.
- Comprehensive engine spares catalogue: Pistons (including Kolbenschmidt OEM), bearings, gasket sets, timing components, water pumps and rebuild kits covering Series fours through modern Ford 2.2/2.4 TDCi, 2.7/3.0 TDV6, 3.6/4.4 TDV8, 4.2/5.0 AJ-V8 and 2.0 Ingenium diesel parts. Turner Engineering catalogue.
Workshop technical notes
Turner Engineering advises that its stripped Td5 long-block assemblies exclude injectors, harness, rocker shaft and fuel pressure regulator, and specifically warns against fitting heavy-duty clutches or solid flywheels on standard Td5 engine builds. Turner Engineering stripped engines.
Sources and related pages
Revision 1: Turner Engineering: Land Rover engine remanufacturers
Turner Engineering (established 1979, UK) is a specialist remanufacturer of classic Land Rover engines and worldwide supplier of OEM and uprated Land Rover engine parts spanning Series II/IIA/III, Defender, Discovery and Range Rover powertrains. Turner Engineering.
Services and product lines
- Remanufactured stripped and short engines: Long-block (stripped) and short-engine assemblies for 2.25-litre petrol/diesel, 2.5-litre petrol/NA diesel/Diesel Turbo, 200Tdi, 300Tdi, Td5 and Rover V8 (3.5, 3.9, 4.0, 4.2 and 4.6-litre) Land Rovers. Turner Engineering stripped engines.
- Uprated AMC Td5 and 300Tdi cylinder heads: Supplies Spanish-cast AMC cylinder heads for Td5 (distinguishing early two-internal-gallery
LDF500160 heads up to VIN 1A622423 from late LDF500170 heads, featuring thicker injector-socket walls to resist cracking) and 300Tdi (LDF500180) engines. Turner Engineering Td5 parts.
- Comprehensive engine spares catalogue: Pistons (including Kolbenschmidt OEM), bearings, gasket sets, timing components, water pumps and rebuild kits covering Series fours through modern Ford 2.2/2.4 TDCi, 2.7/3.0 TDV6, 3.6/4.4 TDV8, 4.2/5.0 AJ-V8 and 2.0 Ingenium diesel parts. Turner Engineering catalogue.
Workshop technical notes
Turner Engineering advises that its stripped Td5 long-block assemblies exclude injectors, harness, rocker shaft and fuel pressure regulator, and specifically warns against fitting heavy-duty clutches or solid flywheels on standard Td5 engine builds. Turner Engineering stripped engines.
Sources and related pages