Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Tuning
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Land Rover

Turner Engineering (established 1979, UK) is a specialist remanufacturer of classic Land Rover engines and worldwide supplier of OEM and uprated Land Rover engine parts spanning Series II/IIA/III, Defender, Discovery and Range Rover powertrains. Turner Engineering.

Services and product lines

  • Remanufactured stripped and short engines: Long-block (stripped) and short-engine assemblies for 2.25-litre petrol/diesel, 2.5-litre petrol/NA diesel/Diesel Turbo, 200Tdi, 300Tdi, Td5 and Rover V8 (3.5, 3.9, 4.0, 4.2 and 4.6-litre) Land Rovers. Turner Engineering stripped engines.
  • Uprated AMC Td5 and 300Tdi cylinder heads: Supplies Spanish-cast AMC cylinder heads for Td5 (distinguishing early two-internal-gallery LDF500160 heads up to VIN 1A622423 from late LDF500170 heads, featuring thicker injector-socket walls to resist cracking) and 300Tdi (LDF500180) engines. Turner Engineering Td5 parts.
  • Comprehensive engine spares catalogue: Pistons (including Kolbenschmidt OEM), bearings, gasket sets, timing components, water pumps and rebuild kits covering Series fours through modern Ford 2.2/2.4 TDCi, 2.7/3.0 TDV6, 3.6/4.4 TDV8, 4.2/5.0 AJ-V8 and 2.0 Ingenium diesel parts. Turner Engineering catalogue.

Workshop technical notes

Turner Engineering advises that its stripped Td5 long-block assemblies exclude injectors, harness, rocker shaft and fuel pressure regulator, and specifically warns against fitting heavy-duty clutches or solid flywheels on standard Td5 engine builds. Turner Engineering stripped engines.

Sources and related pages