Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
ABS / DSC
Parent
HealTech AR Assistant ARA-1 traction control
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
HealTech, Kawasaki

Scope: HealTech ARA-1 and ARA-K4A harness in the manufacturer’s Kawasaki ZX-6R Ninja ABS 2013–2017 supplementary installation. These are identified harness wires and vehicle connections, not numbered ARA ECU cavities. The ABS-equipped installation differs from the 2007–2017 non-ABS ARA-D02 configuration. Confirm the actual model, ABS and loom against the supplier before connecting.

ARA connectionManufacturer-documented connection
Black lead terminalChassis ground
Green leadBlack/orange wire at the black ABS module connector
Blue leadBlack/white wire at the black ABS module connector

The manufacturer source does not provide controller or ABS cavity numbers for these wires; they are not inferred here. Source: HealTech ARA-K4A Kawasaki ZX-6R ABS 2013–2017 supplementary manual, page 2.