Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
ABS / DSC
Parent
HealTech AR Assistant ARA-1 traction control
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
HealTech, Kawasaki

Scope: HealTech AR Assistant ARA-1 with ARA-K4A harness and ARA-D02 sensor kit in the manufacturer’s Kawasaki ZX-6R 2007–2017 non-ABS supplementary installation. The manual documents connections and wire colours for this specific installation; it does not specify controller connector cavity numbers. Do not treat this as a generic Kawasaki ECU or ARA plug pinout. HealTech supplementary manual, pages 1–3.

Identified wire or connectionManufacturer-documented role for this installation
ARA black wire with terminalBattery negative connection.
ARA green wireConnects to the yellow wire at the motorcycle speed-sensor connector as illustrated in this manual.
ARA coil connectorsInstalled inline with the motorcycle’s ignition-coil connectors; the guide also describes a specific inline order when HealTech iQSE equipment is installed.

The separate ARA-D02 non-ABS kit supplies a front-wheel disc and sensor for this installation. HealTech has a different guide and connections for ZX-6R ABS models. Confirm actual bike specification, connector, harness and signal against the cited guide and HealTech, as colours and functions must not be extrapolated to other models or revisions. Controller cavity assignments are not established by this guide.