Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
ABS / DSC
Parent
RHT Motorsport ABS systems
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
RHT Motorsport

RHT supplies vehicle-specific ABS solutions based on MK60, MK60E1 and MK60E5 controller families. Its FAQ distinguishes street-based MK60 units retaining original E46 M3 software from its Race ABS configuration using Continental Motorsport software. The configuration should be confirmed for the specific unit. RHT systems; RHT ABS FAQ.

Applications and integration

RHT describes custom installations across many chassis using compatible wheel-speed sensors. Its FAQ identifies E46 M3 as a typical donor for its street-based configuration, not as a claim that any particular retrofit chassis is a factory motorsport fitment. Supplier-customized sensor mounting and calibration may be required.

The FAQ describes separate wheel-speed outputs for ECU traction-control integration and additional CAN output for the Race ABS configuration; the engine ECU still performs any traction-control intervention. Availability and signals depend on the actual controller and wiring. RHT integration FAQ.

Connector information

RHT’s public description does not provide a kit-specific pinout. MK60, MK60E1 and MK60E5 connections must be identified separately against the supplied controller and harness.

Documented retrofit example

Vorshlag Motorsports documents replacing the inoperative brakes controller in its 2004 Cadillac CTS-V race-car project with a BMW E46 M3 MK60 and a custom Racing Harness Technologies loom supplied by Douglas Wardell. This is an aftermarket race build, not a Cadillac factory fitment; the report does not establish whether the controller used racing or road calibration. Vorshlag project record.