PnPduino Universal is a PnPduino programmable engine-management ECU. Manufacturer product information.

Application and identification
A configurable wire-in ECU that the manufacturer says can operate as a standalone or piggyback and supports engines up to eight cylinders. The manufacturer specifies manual transmission and cable-throttle use.
System and wiring
The input header is a 34-position AMP Superseal 1.0 three-slot connector; the output header is a separate 26-position three-slot connector. Optional components include an internal 4-bar MAP sensor, Bluetooth, VR conditioner, stepper driver and wideband. The ASA/ABS case is not waterproof and the manufacturer says to install it inside the car.
Connector identification
| Connector | Manufacturer description | Scope |
|---|---|---|
| Input header | 34 positions, AMP Superseal 1.0, three-slot | Manufacturer product listing |
| Output header | 26 positions, AMP Superseal 1.0, three-slot | Manufacturer product listing |
A complete pin-by-pin ECU connector table has not been verified from the cited product information. Obtain the diagram for the exact model and revision from PnPduino documentation; the vehicle ECU pinout and other PnPduino models must not be assumed interchangeable.
Software and calibration
The product lists TunerStudio and official Speeduino firmware. Verify outputs, sensors and firmware for the actual build and obtain the model-specific pinout before wiring.
See the PnPduino manufacturer index.
Model-specific wiring document
The manufacturer provides a 34-way input and 26-way output connector drawing. Confirm the exact firmware and unit build, and follow the drawn connector orientation. Open the PnPduino pinout document. The page’s connector-identification table is not a complete cavity-by-cavity schedule.