Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Datalogging and telematics
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Autosport Labs

PodiumConnect/Micro connects a compatible CAN data system to local logging and the Podium service through a separately supplied Wi-Fi hotspot.

PodiumConnect Micro telemetry interface
PodiumConnect/Micro. Image: Autosport Labs; reproduced with permission. Manufacturer product page.

Specifications and operation

PodiumConnect/Micro is designed to connect an existing data system to Podium. The manufacturer documents one CAN 2.0 bus, software-controlled termination, local recording, and streaming through a supplied-by-user Wi-Fi hotspot; it is not the same as an integrated cellular modem. Its guide provides data-system integration instructions including AiM, MoTeC and VBOX. Check the precise source device, available broadcast channels, cable, GPS data and configuration. Its stated maximum telemetry sample rate is 10 Hz, while local logging can use different rates.

The manufacturer lists one CAN 2.0 interface, software-controlled termination, local SD logging and hotspot-based telemetry up to 10 Hz; a separate source supplies channels such as GPS. The local recording rate and transmitted update rate differ. Micro technical guide.

Data analysis software

Podium lap analysis comparing speed traces and time gaps
Podium lap comparison showing speed traces and time gaps in an earlier interface. Image: Autosport Labs, reproduced with permission; manufacturer image source.

The RaceCapture app configures Micro and can analyse locally recorded data; its manufacturer also describes reviewing uploaded sessions on Podium. The Micro receives channels from an external data system and needs a separate hotspot for live internet telemetry. See the manufacturer model guide and RaceCapture app guide for setup and analysis. Download the RaceCapture app from Autosport Labs; Podium is the separate online telemetry and session-analysis service. For system requirements and software details see the Autosport Labs manufacturer page.

Pigtail pinout and wiring

PodiumConnect Micro and MK2 M8 power and CAN schematic
Functional schematic, not connector-face view. Original wiki diagram based on PodiumConnect Micro and MK2 guide.
M8 four-pin pigtailSignal
1CAN low
2Power, 9–24 V
3CAN high
4Ground

These assignments are documented for the named male pigtail. Select the proper adapter and confirm the manufacturer drawing, cavity markings, cable colours and device generation before wiring. Match CAN bitrate, decoding and network termination.

The manufacturer lists an AiM Data Hub adapter and other model-specific leads. Wi-Fi access point mode alone is not a remote internet link; verify hotspot, account and service requirements. Micro installation.

See the Autosport Labs manufacturer guide.