FiTech 30054 Go E85 2×4 Power Adder 1200HP EFI System, Black is a self-learning dual-quad throttle-body fuel-injection system. FiTech describes this as an E85-oriented, dual-quad power-adder system with eight 130 lb/hr injectors. It uses two compatible four-barrel flanges; confirm the exact kit and manifold before ordering.

Identification and fitment
Use the part number to select the correct throttle body, harness, fuel-delivery package and installation instructions. The manifold needs two compatible four-barrel mounting locations. The product listing identifies the pump as separate from this listed base kit; master kits can differ. FiTech 30054 specifications.
| Item | Manufacturer listing |
|---|---|
| FiTech model | 30054 |
| Mounting flange | Dual 4-barrel square bore |
| ECU included | Yes |
| Throttle-body finish | Satin black |
| Fuel pump included in listed base kit | No |
| Timing control, manufacturer listing | Yes |
| Power-adder compatible, manufacturer listing | Yes |
Source discrepancy: The product description rates the system at up to 1,600 hp on petrol and 1,200 hp on E85, while its specification table reverses those fuel labels. Confirm the rating and actual fuel system requirements with FiTech.
Control and installation
FiTech describes self-learning fuel adjustment after initial setup, using an oxygen-sensor input. A correctly specified high-pressure EFI fuel system, sensors and ignition reference are required; verify the fuel-system and distributor configuration against the model manual. A carburettor-replacement throttle body does not automatically provide every ignition or transmission-control function.
Wiring documentation
Use the FiTech installation documentation for the exact system and revision. A complete numbered ECU connector schedule has not yet been verified for this page; do not substitute the wiring of a visually similar kit.