FiTech 30017 Go E85 1200HP Power Adder EFI, Black is a self-learning carburettor-replacement throttle-body fuel-injection system. FiTech describes this as an E85-oriented Go EFI 8 Power Adder system with eight 130 lb/hr injectors, ECU and self-learning. Confirm fuel, power and exact kit specification with FiTech.

Identification and fitment
Use the part number to select the correct throttle body, harness, fuel-delivery package and installation instructions. The flange is specified as a four-barrel square bore; some spread-bore manifolds need an adaptor. The product listing identifies the pump as separate from this listed base kit; master kits can differ. FiTech 30017 specifications.
| Item | Manufacturer listing |
|---|---|
| FiTech model | 30017 |
| Manufacturer maximum power | 1200 HP (E85), 1600 HP (Gas) |
| Mounting flange | 4-barrel square bore |
| ECU included | Yes |
| Throttle-body finish | Black |
| Fuel pump included in listed base kit | No |
| Timing control, manufacturer listing | Yes |
| Power-adder compatible, manufacturer listing | Yes |
Control and installation
FiTech describes self-learning fuel adjustment after initial setup, using an oxygen-sensor input. A correctly specified high-pressure EFI fuel system, sensors and ignition reference are required; verify the fuel-system and distributor configuration against the model manual. A carburettor-replacement throttle body does not automatically provide every ignition or transmission-control function.
Wiring documentation
Use the FiTech installation documentation for the exact system and revision. A complete numbered ECU connector schedule has not yet been verified for this page; do not substitute the wiring of a visually similar kit.